[Asterisk-Users] Problem with PRI and overlapped dialing

[Juri.Reitsakas at Vorguvara.ee]

Hi,

I had the same problem.
I reload and restart the * several times after setting the overlapdial=yes
in zapata.conf

Did you reload the module after setting the overlapdial=yes?

reloading, restarting the * is not enougth to accept the changes in
zapata.conf.

after rmmod and modprobe wct1xxp and zaptel (I have the e100p cards for you
case it should be wct4xxp and zaptel)
overlap dialing  start to work

Regards

Juri



                                                                           
             Christoph Adomeit                                             
             <ado at niederrhein.                                             
             de>                                                        To 
             Sent by:                  asterisk-users at lists.digium.com     
             asterisk-users-ad                                          cc 
             min at lists.digium.                                             
             com                                                   Subject 
                                       [Asterisk-Users] Problem with PRI   
                                       and overlapped dialing              
             05.05.2004 21:26                                              
                                                                           
                                                                           
             Please respond to                                             
             asterisk-users at li                                             
              sts.digium.com                                               
                                                                           
                                                                           




Hi There,

I have an asterisk an a Digium 4 Port E1 Card

On E1 Port No. 1 I have the Telekom PRI
On E1 Port No. 2 I have an Alcatel PBX that cannot be changed

So I have setup my asterisk between Alcatel and Telekom

In extension.conf i configured:

[telekom]
exten => _9149.,1,Dial,ZAP/g2/${EXTEN};
exten => _9149.,2,Hangup

This works great, all incoming calls are directly routed to alcatel

My Problem is dialing out, in extensions.conf I have:
[alcatel]
exten => _XXXX.,1,Dial,ZAP/g1/${EXTEN}
exten => _XXXX.,2,Hangup

I want this to dial all kinds of variable-lenght numbers like:
089-1234567 or
0170-1234567
or 020591234
or local numbers like 91990

Asterisk just starts to dialout when I have entered 4 numbers, I cannot
enter
more numbers

Overlaped dialing is configured but stops at the first match in
extensions.conf

What is a good trick to get dialout on variable-length numbers working ?

Thanks
  Christoph


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users