[Asterisk-Users] Re: Simple SIP X-Lite Configuration Failing

[Girish Gopinath]

Hello,

Replying to the mail which was posted 3 days back. I tested the 
configuration here with SJphones, and got the same error: "circuit-busy". I 
tried  with sip debug turned on, and found that asterisk receives a CANCEL 
request from the user agent immediately after it receives INVITE. When i 
first saw this mail, i thought it was a simple config issue, but even after 
trying for more than 2 hours, i am not able to figure out why it is 
happening.  I tried changing the sip.conf entries with the minimum required 
values, but no success. I started evaluating Asterisk a few months ago, i 
also tried with such simple configurations and did not have issues like 
this.

Here is my Asterisk version:
Asterisk CVS-02/21/04-16:21:31 built by root at localhost.localdomain on a i686 
running Linux

I am really curious if you were able to solve the problem. If so, what was 
the reason behind that weird behaviour and how did you solve it? If not, can 
anyone please tell what is going wrong?

Regards, Girish

BTW, J Poz, dont use reinvite=, it does not exist, use canreinvite= instead.

>From: J Poz <jpoz0000 at yahoo.com>
>Reply-To: asterisk-users at lists.digium.com
>To: asterisk-users at lists.digium.com
>Subject: Re: [Asterisk-Users] Re: Simple SIP X-Lite Configuration Failing
>Date: Sun, 2 May 2004 16:41:52 -0700 (PDT)
>
>Sorry for any confusion.........But in my latest error, instead of calling 
>my clients "jay" and "jtest", I'm calling them "400" and "410".. Everything 
>else is still the same and it's same problem.
>
>My guess is that I've set a parameter incorrectly and therefore Asterisk 
>thinks there's only one client so any calls I try to make between the two 
>fail since it thinks the other client is busy. But I don't understand 
>enough to interpret the error message. I thought the SIP part would be the 
>easy part - I already have the FXO and FXS interfaces working.
>
>Again, thanks for anyone who can help me since I am at a loss!
>
>J Poz <jpoz0000 at yahoo.com> wrote:
>Can anyone help. I've changed the extensions.conf file as follows:
>
>extensions.conf
>[sip] ; context for X-Lite Clients
>exten =>11,1,Dial(SIP/jay,20,tr)
>exten =>22,1,Dial(SIP/jtest,20,tr)
>
>I'm still getting the Auto-congesting error (and circuit-busy). Does anyone 
>know what is causing this in such a simple configuration?
>
>
>localhost*CLI>
>     -- Executing Dial("SIP/400-c3de", "SIP/410|20|tr") in new stack
>     -- Called 410
>May  2 19:15:56 NOTICE[1133742896]: chan_sip.c:1021 auto_congest: 
>Auto-congesting SIP/410-a4a1
>     -- SIP/410-a4a1 is circuit-busy
>   == Everyone is busy at this time
>

_________________________________________________________________
Send flowers in 24 hours!  
http://www.fabmall.com/affiliatehtml/redir/nl7.asp At MSN Shopping.