[Asterisk-Users] Adit 600 - Getting Dial Tone

[Joshua McClintock]

----- Original Message ----- 
From: "Andrew Kohlsmith" <akohlsmith-asterisk at benshaw.com>
To: <asterisk-users at lists.digium.com>
Sent: Monday, June 28, 2004 9:39 PM
Subject: Re: [Asterisk-Users] Adit 600 - Getting Dial Tone


> On Tuesday 29 June 2004 00:24, Joshua McClintock wrote:
> > Asterisk side:  Configure T1 card like this (it's the 2nd T1 card I have
in
> > the system).
> >
> > span=2,1,0,esf,b8zs,yellow
>
> You're deriving timing from your second T1?  It's cool, just making sure.

Would 2 make more sense for the timing?

>
> > fxsls=25-48
>

Just changed this to fxols and ztcfg'ed

> If that's an FXS channel bank, you want fxols.
>
> > Use FXO signalling in my zapata.conf
> > [channel-bank]
> > signalling=fxo_ls
> > context=cb-in
> > group=2
> > channel=> 25-48
>
> looks good.
>
> > set a:1:1-24 side drop
> > set 1:1-8 impedance 19
>
> What firmware are you running?  I don't recall these settings on my
channel
> bank.

Status Equipment:

BootCode Version:   1.23

         CardType   Status       SW Vers    CLEI
         --------   ------       -------    ----
SLOT A   T1x2       Present       6.1.2   SIC3DH0CAA
SLOT 1   FXS8Ax8    Present        1.02   SIC3990CAA
SLOT 2   FXS8Ax8    Present        1.02   SIC3990CAA
SLOT 3   FXS8Ax8    Present        1.02   SIC3990CAA
SLOT 4   FXSx8      Not Present
SLOT 5   FXSx8      Not Present
SLOT 6   FXSx8      Not Present

Alarms:

    Time      Date    Severity Description
    ----      ----    -------- ------------------------------- 
  00:00:04 01/01/2002 Major    A:1-DS1 RAI (Yellow Alarm)
Total=1


>



> Regards,
> Andrew
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>