[Asterisk-Users] RE: Chan_Capi Down

[Andreas Anderson]

Same here :-(

asterisk show's this error in the same moment i'm trying to pick up an 
incoming call:

Jun 23 13:14:03 ERROR[-1284076624]: chan_capi.c:881 capi_write: dont know 
how to write subclass 64

This problem starts with  cvs update -D "6/21/04 21:00:00 CET"

If i revert back to cvs update -D "6/21/04 18:00:00 CET" the problem is 
gone.

-- original message --

I am also having the same problem. Latest CVS & Latest Capi

When it does work and you pick up the phone, CAPI disconnects the call.


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of ePyron Felix
Deierlein
Sent: 28 June 2004 18:34
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Chan_Capi Down

Hi all,

* was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a
Today chan_capi stopped working, without any changings at the system.
It seems, that not * is the reason, because isdn-log also shows no
calls.

If I try to call * from outside via capi, I only get a busy.

That is the try from inside to outside:
stern01*CLI>
    -- data = @89930:0107901723168212
    -- capi request omsn = @89930
  == found capi with omsn = 89930
  == CAPI Call CAPI[contr1/89930]/2   == CAPI Call CAPI[contr1/89930]/2
-- CONNECT_CONF ID=003 #0x000d LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Info                            = 0x0

  == received CONNECT_CONF PLCI = 0x101 INFO = 0
    -- DISCONNECT_IND ID=003 #0x0002 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Reason                          = 0x3302

  == DISCONNECT_IND PLCI=0x101 REASON=0x3302
  == Spawn extension (OutDial-Dial, 01723168212, 2) exited non-zero on
'SIP/ePfd-7515'
    -- data = @89930:01079h
    -- capi request omsn = @89930
  == found capi with omsn = 89930
  == CAPI Call CAPI[contr1/89930]/3   == CAPI Call CAPI[contr1/89930]/3
-- CONNECT_CONF ID=003 #0x000e LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Info                            = 0x0

  == received CONNECT_CONF PLCI = 0x101 INFO = 0
    -- DISCONNECT_CONF ID=003 #0x000f LEN=0014
  Controller/PLCI/NCCI            = 0xffffffff
  Info                            = 0x2002

    -- DISCONNECT_IND ID=003 #0x0003 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Reason                          = 0x3302

  == DISCONNECT_IND PLCI=0x101 REASON=0x3302
  == Spawn extension (OutDial-Dial, h, 1) exited non-zero on
'SIP/ePfd-7515'


dmesg shows:

isdn_dc2minor: di(0) ch(-1072539760) invalid
capidrv-1: now up (2 B channels)
capidrv-1: D2 trace enabled
capi: controller 1 up
kcapi: notify up contr 2
capidrv: controller 2 up
isdn_dc2minor: di(1) ch(-1072539760) invalid
capidrv-2: now up (2 B channels)
capidrv-2: D2 trace enabled
capi: controller 2 up
kcapi: notify up contr 3
capidrv: controller 3 up
isdn_dc2minor: di(2) ch(-1072539760) invalid
capidrv-3: now up (2 B channels)
capidrv-3: D2 trace enabled
capi: controller 3 up
kcapi: notify up contr 4
capidrv: controller 4 up
isdn_dc2minor: di(3) ch(-1072539760) invalid
capidrv-4: now up (2 B channels)
capidrv-4: D2 trace enabled
capi: controller 4 up


I hope, that you could help me...

Thanks


Felix Deierlein

_________________________________________________________________
Listen to music online with the Xtra Broadband Channel  
http://xtra.co.nz/broadband