[Asterisk-Users] Protocol Error (6) using Zaphfc

[nrb]

Hi!

Has anybody seen anything like this using zaphfc?
On outgoing calls (via isdn)  , the line gets hung-up as soon as the called
party answers.
As seen below i get some protocol error (6) - but i'm not sure if this is
related to the "hang-up" which  apparently comes a little earlier?!
Incomming calls on the isdn (zaphfc) interface is working just fine

(P.S. what about the D-channel going up & down all the time - is that
normal? )


Kind Regards
NRB


Setup
Bri-stuff - 0.0.20
Asterisk CVS-HEAD-06/23/04-15:45:48 built by root at localhost.localdomain on a
i686 running Linux

Zapata.conf:
[channels]
switchtype = euroisdn
; p2mp TE mode
signalling = bri_cpe_ptmp
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net
pridialplan=local
prilocaldialplan=local
echocancel=yes
immediate=yes
group = 1
context=demo
channel => 1-2

Zaptel.conf:
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3

Example where a sip client (2203) is calling xxxx7024