[Asterisk-Users] Asterisk on 64bit ?

[Dr. Rich Murphey]

How do you balance the number of active connections per server?

Cheers,
Rich


> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Nicholas Bachmann
> Sent: Sunday, June 27, 2004 9:41 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Asterisk on 64bit ?
> 
> WipeOut wrote:
> 
> > Hans-Henrik Andresen wrote:
> >
> >> Hi,
> >>
> >> I'm about to set up a asterisk for 5000 users, and the customer had a
> >> 64bit
> >
> [...]
> 
> >> The system is suposed to scale to 15000 users.
> >
> > I seriously doubt 1 server will handle that type of load (unless you
> > throw about 15 processors in it)..
> >
> > My advice would be to setup 1 server per 1000 users (working on appox
> > 10 to 1 ratio of active calls) then setup IAX trunks between the
> > servers and the PSTN gateways..
> 
> Better yet, how about a nice load balancer?  If you put your SIP
> registrations in a database that all the servers can share, you'll have
> no problems when a server goes down.
> 
> > This way if a server fails then you only have 1000 users down and not
> > the whole company..
> 
> This way is a server fails you've only lost the calls that are going
> through it and nothing else.
> 
> Nick
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>