[Asterisk-Users] ATA186 (sip) in * dynamic mode

[Duane Cox]

I've got my ATA's setup with DHCP, host=3Ddynamic, and turned the
registration on in the ATA
All is well as long as my sip.conf is configured using the phone number like
so...

[1231231234]
type=friend
host=dynamic
context=main
canreinvite=no
username=1231231234
secret=worknow
disallow=all
allow=ulaw
allow=alaw


It appears to me that the Cisco ATA (v3.1) will register the device using
the phone number only, even though you can change the authentication
username, it always uses the phone number (UID0:)

This forces me to use this as my configuration for that unit in the
sip.conf [phone number]

Is there anyway around this, or to force the ATA to register with it's
mac address, or something i can do in asterisk, or is this just the way
it works, and everyone else is doing this...

Thanks
Duane Cox
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040625/eb0592a4/attachment.htm