[Asterisk-Users] Dell 400SC and X100P

Isamar Maia isamar at isamarmaia.org
Fri Jun 25 04:56:29 MST 2004


It worked. Perfect!!!! Thanks a lot!


Isamar


On Fri, 25 Jun 2004, Martin List-Petersen wrote:

> Actually ACPI is enabled no matter what on the machine. I wasn't talking
> about ACPI in the CMOS, but ACPI support in the Linux Kernel.
>
> I'm using 2.4.26 (kernel.org+latest libata patches) on a Debian Sarge
> box.
>
> Kind regards,
> Martin List-Petersen
>
> On Thu, 2004-06-24 at 14:25, Isamar Maia wrote:
> > Thanks a lot for replying.
> >
> > I turned on the ACPI in the CMOS and it got better.
> > At least I call receive several calls in sequence and call out but
> > it hangs up right after the person gets the phone in the other side.
> > So, something is still missing.
> > What is your ACPI mode in the CMOS ? S1 or S3?
> > Which kernel version are you using? Can you send me your .config ?
> >
> > Thanks again,
> >
> > Isamar
> >
> >
> > On Thu, 24 Jun 2004, Martin List-Petersen wrote:
> >
> > > Is your kernel ACPI enabled ?
> > >
> > > The motherboard in the PE400SC is basically the Dimension 8300, which i
> > > use for my development box with 1 X101P, 1 TDM400P and two ISDN cards
> > > here at home and that works without problems.
> > >
> > > One thing to make sure with these boards is that ACPI is enabled, since
> > > they are ACPI only.
> > >
> > > Kind regards,
> > > Martin List-Petersen
> > >
> > >
> > > On Thu, 2004-06-24 at 02:58, Isamar Maia wrote:
> > > > I have a Dell PowerEdge 400SC with a X100P and a TDM01b.
> > > > The board works wonderfully in another machine but in this brand new one,
> > > > it just get in nuts.
> > > >
> > > > The problem is:
> > > >
> > > > 1) Zaptel recognizes it perfectly
> > > > 2) No IRQ conflicts, two-wire new cable.
> > > > 3) Asterisk starts up and listen the ring and answer the cal
> > > > 4) RIght after answering the call, it's dropped.
> > > > 5) The following calls, even with asterisk off, the driver(???) answers
> > > > the call and hang it up. With the * running, it doesn't even get any ring,
> > > > and the call is answered and dropped right away.
> > > >
> > > > Isamar
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>




More information about the asterisk-users mailing list