[Asterisk-Users] Two AVM Fritz Card (hack does not work) what I am doing wrong?

[Tomaz]

hi Jakob¸

i see you have installed 2 fritz card in PC .. I have a lot of problems 
already with one card .. When i type capiinfo computer freeze.
I have shared irq of fritz card with some motherboard resources ? You 
think this is a problem ? what kernel you use? what drivers version of 
drivers you have?
Could you send me patched drivers for second card (sources) - i already 
patch two times but no success :(

you have now working asterisk with two cards?
thank you,
Tomaz

Jakob Strebel wrote:

> Hi,
> I tried to install the following hack.
> http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO
> But the 2nd AVM Fritz PCI card is still not showing up.
>
> My environment is:
> debian 2.4.24
> (asterisk 0.72)
>
> Just a quick explanation what I did:
> - edited the filed as described above
> - make clean
> - make
> - make install
> - reboot my machine
> - modprobe capi
> - insmod -f fcpci
>
> What do I miss? What did I do wrong?
>
> regards jakob
>
> ********************************************************************
> asterisk:~# lsmod
> Module                  Size  Used by    Tainted: PF
> fcpci                 532320   2
> capi                    6528   4
> kernelcapi             30624   3  [fcpci capi]
> capiutil               22912   0  [kernelcapi]
> asterisk:~#
>
>
> asterisk:/var/log# capiinit start
> modprobe: Can't locate module capifs
> modprobe: Can't locate module capifs
> WARNING: filesystem capifs not available
> modprobe: Can't locate module f2pci
> ERROR: failed to load driver f2pci
> asterisk:/var/log#
>
> This is what I see in the log file:
>
> Mar 22 17:37:55 asterisk -- MARK --
> Mar 22 17:42:14 asterisk kernel: CAPI-driver Rev 1.1.4.1: loaded
> Mar 22 17:42:14 asterisk kernel: capi20: started up with major 68
> Mar 22 17:42:14 asterisk kernel: kcapi: capi20 attached
> Mar 22 17:42:14 asterisk kernel: capi20: Rev 1.1.4.2: started up with 
> major 68 (no middleware)
> Mar 22 17:42:41 asterisk kernel: fcpci: AVM FRITZ!Card PCI (2nd) 
> driver, revision 0.5.2
> Mar 22 17:42:41 asterisk kernel: fcpci: (fcpci built on Mar 22 2004 at 
> 17:41:36)
> Mar 22 17:42:41 asterisk kernel: fcpci: Loading...
> Mar 22 17:42:41 asterisk kernel: f2pci: Driver 'fcpci' attached to stack
> Mar 22 17:42:41 asterisk kernel: kcapi: driver fcpci attached
> Mar 22 17:42:41 asterisk kernel: fcpci: Auto-attaching...
> Mar 22 17:42:41 asterisk kernel: PCI: Enabling device 00:0f.0 (0000 -> 
> 0003)
> Mar 22 17:42:41 asterisk kernel: PCI: Assigned IRQ 5 for device 00:0f.0
> Mar 22 17:42:41 asterisk kernel: fcpci: Stack version 3.11-02
> Mar 22 17:42:41 asterisk kernel: kcapi: Controller 1: fritz2-pci attached
> Mar 22 17:42:41 asterisk kernel: kcapi: card 1 "fritz2-pci" ready.
> Mar 22 17:42:41 asterisk kernel: fcpci: Loaded.
> Mar 22 17:42:41 asterisk kernel: kcapi: notify up contr 1
> Mar 22 17:42:41 asterisk kernel: capi: controller 1 up
> Mar 22 17:57:55 asterisk -- MARK --
> asterisk:/var/log#
>
>
>
>
>