FW: [Asterisk-Users] No dial tone after installation

[Don Moskaluk]

So far so good, vi came back to me after 5 years of being idle!

I'm getting error messages on the following:

Chan_skinny.c 2569 reload config
Chan_oss.c sound card init unable to load

And yes no dial tone.

Don Moskaluk
don at moskaluk.com <mailto:don at moskaluk.com> 
www.moskaluk.com <http://www.moskaluk.com> 



> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Eric Wieling
> Sent: Wednesday, June 23, 2004 9:59 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: FW: [Asterisk-Users] No dial tone after installation
> 
> 
> I forgot to add noload => chan_alsa.so
> 
> On Wed, 2004-06-23 at 20:43, Eric Wieling wrote:
> > /etc/asterisk/modules.conf put in:
> > 
> > noload => chan_modem.so
> > noload => chan_modem_i4l.so
> > noload => chan_modem_bestdata.so
> > noload => chan_modem_aopen.so
> > noload => chan_phone.so
> > noload => chan_oss.so
> > noload => chan_iax.so
> > noload => chan_skinny.so
> > 
> > On Wed, 2004-06-23 at 20:09, Don Moskaluk wrote:
> > > Oh geez nobody respond, I guess I have to be more descriptive.
> > > 
> > >  
> > > 
> > > I'm install Asterisk and FXO FXS Lite dev kit from Digium everything
> > > has installed and I am getting an error message that my sound card is
> > > not enabled.  I'm using a Dell Optix (whatever).  Everything seems to
> > > be in order.  I connect an analogue telephone to the FXO port? and try
> > > to dial.  Dial tones work however not dial tone.
> > > 
> > >  
> > > 
> > > Any ideas or am I still too vague?
> > > 
> > >  
> > > 
> > > Don Moskaluk
> > > 
> > > don at moskaluk.com
> > > 
> > > www.moskaluk.com
> > > 
> > > -----Original Message-----
> > > From: asterisk-users-admin at lists.digium.com
> > > [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Don
> > > Moskaluk
> > > Sent: Tuesday, June 22, 2004 9:49 PM
> > > To: Asterisk
> > > Subject: [Asterisk-Users] No dial tone after installation
> > > 
> > > 
> > > 
> > >         I'm a newbie, after installing asterisk software and the
> > >         Digium Lite card I do not get a dial tone.  The telephone push
> > >         buttons makes tones but no dial tone.  Is this a hardware
> > >         problem ?  
> > >         
> > >          
> > >         
> > >         Can some one point me in the right direction.
> > >         
> > >          
> > >         
> > >         Sincerely,
> > >         
> > >          
> > >         
> > >         Don Moskaluk
> > >         
> > >         don at moskaluk.com
> > >         
> > >         www.moskaluk.com
> -- 
>           Eric Wieling * BTEL Consulting * 504-899-1387 x2111
> "In a related story, the IRS has recently ruled that the cost of Windows
> upgrades can NOT be deducted as a gambling loss."
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04
> 
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04