[Asterisk-Users] two avm fritz cards in pc

[Tomaz]

hello,

i 've edit all files as described in  
http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO ,

but here is the problem...

capiinit give me no error at all,
but capiinfo -> pc freeze!

here is proc status:
less /proc/capi/driver   fcpci                            1 0.4
f2pci                            0 0.4

less /proc/capi/controller
1 fcpci      running  fritz-pci        A1 3.10-02 0xc400 5

here is only one ? why?



here is dmesg:

capifs: Rev 1.1.4.1
CAPI-driver Rev 1.1.4.1: loaded
capi20: started up with major 68
kcapi: capi20 attached
capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs)
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
fcpci: AVM FRITZ!Card PCI driver, revision 0.4
fcpci: (fcpci built on Jun 22 2004 at 11:47:21)
fcpci: Loading...
fcpci: Driver 'fcpci' attached to stack
kcapi: driver fcpci attached
fcpci: Auto-attaching...
PCI: Found IRQ 5 for device 01:0b.0
PCI: Sharing IRQ 5 with 00:1f.3
fcpci: Stack version 3.10-02
kcapi: Controller 1: fritz-pci attached
kcapi: card 1 "fritz-pci" ready.
fcpci: Loaded.
kcapi: notify up contr 1
capi: controller 1 up
f2pci: AVM FRITZ!Card PCI (2nd) driver, revision 0.4
f2pci: (f2pci built on Jun 22 2004 at 12:49:25)
f2pci: Loading...
f2pci: Driver 'f2pci' attached to stack
kcapi: driver f2pci attached
f2pci: Loaded.

fcpci is loaded and found one card, but f2pci is loaded but found no cards

what can be wrong? any idea?



thank you ,
Tomaz