[Asterisk-Users] Siemens Optipoint 400 SIP Problem

Tue Jun 22 03:39:03 MST 2004

Hi!
The Problem with the password is strange. I have the same password problems but my phone is registering to port 5060.

But I think in our case the problem isn´t caused by the ports. it must be something different.
I nearly tried everything to get the optipoint working.
I will keep trying, but I don´t know how long.

Thanks for your help !

regards 

Roland

> Hi!
> 
> Yes we have many kinds of phones hwere in the show room, snom, polycom,
> cisco, grandstream, ipdialog, intracom, d-link, symbol ....all of them works
> with asterisk with some testing and with some issues ...but works.
> 
> The optipoint is the only one that i´m really can´t make work till now.
> 
> In the other side i can register the optipoint with FWD and Iconnecthere and
> use it really well
> 
> The passwork field is really a problem...only acept numbers and more them 6
> characters.
> 
> I have port 5060 set up in the phone but it is registerisk with 1028.
> 
> I will keep trying...
> 
> regards
> 
> Miklos
> 
> ps. thanks to someone that alert me about the date in the mail, sorry about
> that list!
> 
> 
> ----- Original Message ----- 
> From: <Roland.Knoerl at student.fh-nuernberg.de>
> To: <asterisk-users at lists.digium.com>; <asterisk-users at lists.digium.com>
> Sent: Tuesday, June 22, 2004 6:26 AM
> Subject: Re: [Asterisk-Users] Siemens Optipoint 400 SIP Problem
> 
> Thanks for your reply Miklos.
> I´m afraid I´m confronted with the same problem.
> Now my optipoint is registering to asterisk.
> (I had to configure the system type to SERVER , the Registrar Address &
> Server Address to my asterisks-ip-address.)
> Now the optipoints are telling me:
> No Server... , that´s the same problem you have.
> Another problem is, that the opti can be called, but is not able to dial.
> Do you have a workaround for this?
> I tried different firmwares v2.16, v2.25, v2.3, v3 with TLS, but in all of
> them the same failure occured.
> 
> Think I have to change to a different kind of hard-phone.... :-(
> Do you use another Hardphone ?
> 
> Thanks in advance !
> 
> Roland
> 
>> Hi!
>>
>> I have updated the optipoint to the last  software version
>>
>> I can Call the optipoint from other phones and talk.
>>
>> The optipoint register with asterisk.... but in the phone display i have
>> only "no server....." and no dial tone.
>>
>> The only way to register was with no password to the optipoint peer.
>>
>> look at cli:
>>
>>  -- Registered SIP 'optipoint' at 192.168.0.36 port 1028 expires 3600
>>
>>     -- Executing Dial("SIP/snom200-da4c", "SIP/optipoint|20|tr") in new
>> stack
>>     -- Called optipoint
>>     -- SIP/optipoint-a32b is ringing
>>     -- SIP/optipoint-a32b answered SIP/snom200-da4c
>>     -- Attempting native bridge of SIP/snom200-da4c and SIP/optipoint-a32b
>>   == Spawn extension (internal, 37, 1) exited non-zero on
> 'SIP/snom200-da4c'
>>
>> asterisk-eth0*CLI> sip show peers
>> Name/username    Host                 Mask             Port     Status
>> optipoint/optip  192.168.0.36    (D)  255.255.255.255  1028     OK (130
> ms)
>>
>> maybe that helps
>>
>> miklos
>>
>> ----- Original Message ----- 
>> From: <Roland.Knoerl at student.fh-nuernberg.de>
>> To: <asterisk-users at lists.digium.com>
>> Sent: Monday, June 21, 2004 3:23 PM
>> Subject: [Asterisk-Users] Siemens Optipoint 400 SIP Problem
>>
>> Hi there,
>> I tried to get a few "Optipoint 400 SIP" working with *, but it refused to
>> work properly.
>> In my testing-network i have two Sjphones (they are working really fine)
> and
>> three optipoints.
>> I´m able to dial the number of a Sjphone on all of the optipoints.
>> The call is signalled at the Sjphone with the right number of the
> optipoint
>> and an connection can be established.
>>
>> But when I try to call one of the optipoints from a Sjphone, or from one
>> opti to another, then no connection or signalling can be established.
>> But Asterisk tells me that
>> == Everyone is busy at this time.
>>
>> In my opinion, the optipoint is not registering correct to asterisk, when
> it
>> is connected to the network.(By the way, SJphone does register to
> asterisk)
>>
>> So here is my question, does anyone suffer from the same problem and/or
>> solved it???
>>
>> Thanks a lot,
>>
>> greetz
>>
>> Roland (erlangen/germany)
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users