[Asterisk-Users] Problems with faxing via TE405P/Asterisk

[Steve Hanselman]

I've changed the zaptel.conf to set both as internal, and it now seems to
work, which is backwards to the config I thought it should have been, I
would have thought that the Telewest PRI would have been 1 and the GDK 0?

Can somebody confirm that this is the correct definition for timing, if it's
a +ve number then it's external clocking with the lowest 1 being the highest
priority. 

All spans are clocked relative to the external source and the external
source selected is the lowest priority number that is currently being
clocked?

I'll experiment some more.



-----Original Message-----
From: Yifang Dai [mailto:daiy.akx at yarde.com] 
Sent: 19 June 2004 03:22
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Problems with faxing via TE405P/Asterisk

Let's try again, missed a line in the last reply...

On Fri, Jun 18, 2004 at 09:55:24PM -0400, Yifang Dai wrote:
> On Fri, Jun 18, 2004 at 09:27:52PM +0100, Steve Hanselman wrote:
> > 
> >    LG GDK-186 PBX --PRI--->  TE405P/Asterisk  ---PRI---> Telewest (Telco
> >    provider)
> > 
> 
> --snip---
> 
> >    Any ideas on where to start?
> 

This is most likely to be a timing issue. You need to make sure your
asterisk is get timing from your telco, and provide timing for you gdk
pbx. /etc/asterisk/zaptel.conf is the place to look.        

-- 
Yifang Dai
Senior System Administrator
Yarde Metals Inc
45 Newell St, Southington, CT 06010
(Phone) 860-406-6107; (FAX) 860-406-4060
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk