[Asterisk-Users] Problems with X100P

[David J Carter]

Don't you need a 'modprobe wcfxs' also?

Dave

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Adam Lewis
Sent: 18 June 2004 14:57
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Problems with X100P


All,

I'm having trouble getting the X100P working. 


Lsmod shows :

zaptel                179808   0

I did a .

# modprobe zaptel

and here is my zaptel.conf (comments omitted)

__SNIP__

fxsks=1
loadzone = us
defaultzone=us

__SNIP__

Here is zapata.conf

__SNIP__

[trunkgroups]
[channels]
context=default
switchtype=national
signalling=fxo_ls
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
group=1
callgroup=1
pickupgroup=1
immediate=no
context=sip
signalling=fxs_ks
callerid="Phone 1"
channel=1

__SNIP__

ztcfg -vv gives the following output..

__SNIP__

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels configured.

ZT_CHANCONFIG failed on channel 1: No such device or address (6)

__SNIP__

Any ideas,

Thanks,

Adam

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users