[Asterisk-Users] pri with TE410P not working (Austria)

[Wolfgang Pichler]

hi all,

i am trying to get my TE410P (see previous posts) working in Austria
(telekom Austria - i am still waiting for an answer for my questions).

my /etc/zaptel.conf looks like
--------------------------------
span=1,1,0,ccs,hdb3,crc4,yellow
span=2,2,0,ccs,hdb3,crc4,yellow
bchan=1-15,17-31
dchan=16
bchan=32-46,48-62
dchan=47

loadzone=at
defaultzone=at
--------------------------------
after modprobe wct4xxp and ztcfg -s and ztcfg -v i'll get:
--------------------------------
TE410P: Disabling interrupts since there are no active spans
Registered tone zone 9 (Austria)
TE410P: Span 1 configured for CCS/HDB3/CRC4
SPAN 1: Primary Sync Source
TE410P: Span 2 configured for CCS/HDB3/CRC4
SPAN 2: Secondary Sync Source
--------------------------------

... on the card i can see the two leds pulsing red (i think thats the
yellow alaram - or i am wrong) ?

then i start asterisk with this zaptel.conf
--------------------------------
[channels]
switchtype = euroisdn
signalling = pri_cpe
pridialplan = local
group = 1
context = default
channel => 1-15,17-31

switchtype = euroisdn
signalling = pri_cpe
pridialplan = local
group = 2
context=default
channel => 32-46,48-62
----------------------------

on the asterisk prompt i turn on pri intense debugging for span 1 or 2
(both the same result) and i will get (za 2 messages per second):

----------------------------
Sending Set Asynchronous Balanced Mode Extended

> [ 00 01 7f ]

> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of data
Urgent handler
----------------------------
... and i have no idea what this means

can someone please help me to get this working ?

best regards
Wolfgang