[Asterisk-Users] collaboration with Panasonic PBX

[Peter Svensson]

On Mon, 14 Jun 2004, Shoval Tomer wrote:

> Both these options require that I'd put a matching interface in the PBX.
> This means purchasing a card for the PBX, for no small fee, and is
> undoable as there's no expansion room left in it.

Are all the isdn bri slots on the mainboard used already? Or can you get 
it with a mainboard without 4 bri ports? That was the only option when we 
purchased ours, but that was 7-8 years ago.

> The IP phones will be at the remote office. And users in HQ will just
> use the regular extensions, and dial 8 (for instance) as a prefix to get
> one of the two lines connected to Asterisk from the PBX.

8 is reserved for trunk-seiziure (followed by the number of the trunk to 
seize) by default on a kx-td1232. 

> My question is can I use X100P cards to connect Analog lines from the
> PBX to Asterisk, and utilize both calls from HQ to the IP Phones and
> calls from the IP Phones to HQ this way.

It ought to work. You will not get DDI support but that is not needed in 
your case I think.

Peter
--
Peter Svensson      ! Pgp key available by finger, fingerprint:
<petersv at psv.nu>    ! 8A E9 20 98 C1 FF 43 E3  07 FD B9 0A 80 72 70 AF
------------------------------------------------------------------------
Remember, Luke, your source will be with you... always...