[Asterisk-Users] ISDN Bristuff + analogue

[clive18 at webmail.co.za]

Thanks, I'll give this a try.

On Sun, 13 Jun 2004 09:29:33 +0100
 gromit <timweb at txrx.org.uk> wrote:
> I have bristuff 0.0.2 running with an X100P card.  I have
> the BRI channels defined first,  and then astly load my
> wcfxo (X100P) driver. If you modprobe the wcfxo card last
> it works. 
> Here is my config:
> 
> loadzone=uk
> defaultzone=uk
> span=1,1,3,ccs,ami
> bchan=1-2
> dchan=3
> span=2,0,3,ccs,ami
> bchan=4-5
> dchan=6
> fxsks=7
> 
> The loas sequence (when in ./bri-stuff-0.0.2/zaphfc) is
> 
> modprobe zaptel
> insmod ./zaphfc.o (or ko if using a 2.6 kernel)
> modprobe wcfxo
> asterisk
> 
> the last modprobe also runs ztcfg.
> 
> Rgds
> Tim
> 
> 
> 
> clive18 at webmail.co.za wrote:
> 
> >Hi
> >
> >does anyone know if its possible to run Bristuff
> together
> >with a tdm card in the same computer. 
> >I get an error when trying to start asterisk in
> chan_zap.c
> >
> >My zaptel.conf looks like this:
> >
> >loadzone=us
> >defaultzone=us
> >fxsks=1
> >fxoks=2
> >fxoks=3
> >span=1,1,3,ccs,ami
> >bchan=4-5
> >dchan=6
> >
> >Thanks
> >Clive
> >
> >
>
>_____________________________________________________________________
> >For super low premiums ,click here
> http://www.dialdirect.co.za/quote
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >  
> >
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>
   http://lists.digium.com/mailman/listinfo/asterisk-users

_____________________________________________________________________
For super low premiums ,click here http://www.dialdirect.co.za/quote