[Asterisk-Users] Zapata FXO always answers call?

[Gelson Dias Santos]

Steven Critchfield wrote:

> your using an analog adapter. We cover this regularly. You need
> callprogress detection since you don't have a reliable way of doing it
> via the analog adapter. 

	No, I´m not using an analog adapter. As I said, my X100P connects 
directly to my PBX.
	Gelson


> 
> On Wed, 2004-06-02 at 14:09, Gelson Dias Santos wrote:
> 
>>	I have some X100P connected to my analog PBX. When I want to call an 
>>analog extension on that PBX I use the following rule:
>>
>>exten => _21XX,1,Dial(Zap/g1/${EXTEN:2},20)
>>
>>	where 21 is just a prefix to indicate it´s an analog extension and XX 
>>matches the real two digit extension number. (this is why I strip of two 
>>digits when dialing Zap/g1. Well, everything works fine, except that * 
>>says on the log that the call was answered, even if it´s still ringing.
>>	The problem is that now I want to set up voicemail to those analog 
>>extensions, but since * says it "answered on first ring" it never goes 
>>to the next priority, where voicemail is called.
>>	I tried callprogress=yes on zapata.conf but it has no effect. Here is a 
>>tipical log from a call I have _not_ answered:
>>
>>     -- Executing Dial("SIP/2000-a638", "Zap/g1/32|20") in new stack
>>     -- Called g1/32
>>     -- Zap/1-1 answered SIP/2000-a638
>>
>>	I´m runnign 0.9.0 from the tar archive. Is this a known bug? Is there a 
>>workaround for it?
>>
>>	Gelson
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users