[Asterisk-Users] chan_capi and DDI (Anlagenanschluss)

[Holger Schurig]

> At least for PTMP (Mehrgeräteanschluss) the MSN does not contain the
> areacode.

Thanks for the info. Somewhere in the list archive I saw a hint to use the 
areacode as well. Now tried it without and had the same (non)success:

  -- Executing Dial("SIP/hschurig-ced5", "CAPI/9141:0170811xxxx|60|T") in 
new stack
  -- data = 9141:0170811xxxx
  -- capi request omsn = 9141
== found capi with omsn = 9141
== CAPI Call CAPI[contr1/9141]/1     -- creating pipe for PLCI=-1
     > sent CONNECT_REQ MN =0x5
  -- Called 9141:01708112001
  -- CONNECT_CONF ID=001 #0x0005 LEN=0014
Controller/PLCI/NCCI            = 0x101
Info                            = 0x0

  -- CONNECT_CONF ID=001 #0x0005 LEN=0014
Controller/PLCI/NCCI            = 0x101
Info                            = 0x0

== received CONNECT_CONF PLCI = 0x101 INFO = 0
  -- DISCONNECT_IND ID=001 #0x001c LEN=0014
Controller/PLCI/NCCI            = 0x101
Reason                          = 0x3302

== DISCONNECT_IND PLCI=0x101 REASON=0x3302
     > sent DISCONNECT_RESP PLCI=0x101
  -- CAPI Hangingup
  -- removed pipe for PLCI = 0x101
== No one is available to answer at this time



BTW: at a different NTBA (which is a PTMP for an ISDN router) I can call 
out and receive calls, so the chan_capi + fcpci + capi chain is known to 
work.