[Asterisk-Users] BroadVoice usage?

[Zac Amsler]

DTMF=inband


Zac

-----------------------------------------------------------------------
Zac Amsler, Technical Team
WNOC.COM http://www.wnoc.com
Phone: (989) 896-3329 X 2000
 
If you are receiving this e-mail as a respones to a technical issue, Please
respond to me via the support e-mail address provided by your ISP.
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Greg Hill
Sent: Friday, June 04, 2004 11:35 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] BroadVoice usage?

On Fri, 4 Jun 2004, Michael Swan wrote:

> Yes, we do have a context for incoming calls -- it's used for not only
> BroadVoice (which isn't working) and VoiceGlo and iConnectHere (which
> are working.) And, yes, we do have a pattern match on our number in our
> [general] context in extensions.conf. As of this morning, when we dial
> our BroadVoice number, we get a fast busy and our Asterisk server is
> never contacted.

similar thing happened when I tried to use voiceglo.. It appeared to be a
problem in the provisioning of the phone number. Their tech support never
responded to fix it, so I dumped 'em and now use Broadvoice instead.

> As for outgoing, we did make the change to sip.broadvoice.com
> (from proxy.broadvoice.com). This did make a change on our outgoing
> calls: the BroadVoice server responded with:
>          Got SIP response 604 "Does not exist anywhere" back from
147.135.0.129
> This is progress but it's still an error. :-( And, no: our Asterisk
> server is not behind a NAT firewall.

I don't see fromuser= and fromdomain= in your config below.. try adding
those. In the SIP debug, you'll probably see that your asterisk server is
putting From : asterisk at yourhost in the messages to broadvoice. Their
server doesn't like that; it wants to see From:
yournumber at sip.broadvoice.com in the message. fromuser and fromdomain make
that happen.


PS, a question for Jay. What dtmf mode are you using? I haven't got dtmf
working inbound or out yet.

Greg


>
>
>
> At 03:04 AM 6/3/2004 -0500, you wrote:
> >I have Broadvoice working on three lines.  Had the same problems you
> >have in the beginning.
> >
> >Trouble-shoot one thing at a time...
> >Incoming: Do you have a context for incoming calls set up?  It belongs
> >in your [general] section.  Once there, do you have a pattern or
> >extension matching your phone number?  If Asterisk can't match the
> >extension for an incoming call, the call is rejected and BV tells you
> >it's busy.
> >
> >Outgoing: Use host=sip.broadvoice.com.  Don't use proxy.  If your
> >asterisk sits behind a NAT firewall, it wouldn't hurt to add "nat=yes"
> >to your [broadvoice] section.
> >
> >-----Original Message-----
> >From: asterisk-users-admin at lists.digium.com
> >[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Michael Swan
> >Sent: Tuesday, June 01, 2004 11:51 AM
> >To: asterisk-users at lists.digium.com
> >Subject: [Asterisk-Users] BroadVoice usage?
> >
> >
> >Hi all,
> >
> >I've been trying to use BroadVoice as a SIP service provider. They don't
> >
> >officially
> >support * but are helpful when it comes to answering questions for setup
> >parameters. They claim they have no firewalls or access lists that need
> >to be set up so I can get access to their servers.
> >
> >However, something's still not quite right when I use the parameters. It
> >looks like our Asterisk server is registered with their server and I
> >believe I have all the other entries set up correctly (we use other
> >services, too, such as iConnectHere and Voiceglo so I'm pretty sure I've
> >got my BroadVoice set up correctly.) "sip show registry" shows my *
> >server as registered with the BroadVoice IP address.
> >
> >When I try to make an outbound call, there is no answer from the
> >BroadVoice server (proxy.boradvoice.com) to Asterisk's INVITE.
> >
> >When I try to call our assigned BroadVoice number, I immediately get a
> >BroadVoice message saying the number is busy.
> >
> >I can provide the sip debug output but it basically shows that
> >BroadVoice appears to be not communicating with inbound or outbound
> >requests.
> >
> >Here are the entries:
> >
> >sip.conf
> >
> >register => phonenumber:password at sip.broadvoice.com:5060/phonenumber
> >
> >[broadvoice]
> >type=friend
> >username=phonenumber
> >secret=password
> >host=proxy.broadvoice.com
> >dtmfmode=inband
> >disallow=all
> >allow=ulaw
> >allow=alaw
> >
> >extensions.conf
> >
> >; calls via BroadVoice
> >exten => _6NXXXXXX,1,Dial,SIP/1925${EXTEN:1}@broadvoice
> >exten => _61NXXNXXXXXX,1,Dial,SIP/${EXTEN:1}@broadvoice
> >exten => _6011.,1,Dial,SIP/${EXTEN:1}@broadvoice
> >exten => _6.,2,Congestion
>
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Zac Amsler (zamsler at cc0.biz).vcf
Type: text/x-vcard
Size: 335 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040605/8046b59f/ZacAmslerzamslercc0.biz.vcf