[Asterisk-Users] miserable time with Cisco ATA186

[Erick Weber V.]

also you have to set the sip.conf on the ATA sittings to disallow=all,
allow=g729  OR set the txcodec and rxcodec to 3 on the ATA
----- Original Message ----- 
From: "Matthew Simpson" <matthew at symatec-computer.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, June 04, 2004 8:52 AM
Subject: Re: [Asterisk-Users] miserable time with Cisco ATA186


> If I turn allow=ulaw on only, asterisk tries to use it
>
> a=rtpmap:0 PCMU/8000
>
> but the ATA says it doesn't have it:
>
> Answering/Requesting with root capability 4
> Answering with non-codec capability 0x1(G723)
>
> If I turn allow=alaw on only or with allow=ulaw, asterisk sends it, the
ATA
> says it has it [alaw], but it still won't negotiate it.
>
> I think the stupid ATA is just determined to use G723 no matter what... I
> have LBRCodec set to 3 which should have it try to use G729, but it still
> tries to use G723.  The AudioMode setting has a parameter bit to "Enable
> G711 only", but I'm not sure how that bit thing works.  Either the default
> 0x00150015 or the recommended 0x00140014 fails.  [btw, bit 1 should be "1"
> to enable G711 only, if someone can help me there].
>
> I'm seriously about to punt this thing into the garbage.
>
> Help!
>
> thanks,
> matt
>
> > From: "Timothy R. McKee" <tim at baseworx.net>
> > To: <asterisk-users at lists.digium.com>
> > Subject: RE: [Asterisk-Users] miserable time with Cisco ATA186
> > Date: Fri, 4 Jun 2004 00:04:22 -0400
> > Reply-To: asterisk-users at lists.digium.com
> >
> > Noticed that he has ALAW set as the preferred codec on the ATA.  I'd
> suggest
> > testing with allow of ulaw only, then try turning on other codecs.  We
> know
> > that one works well.
> >
> >
> >
> > ====================================================================
> > Timothy R. McKee
> >
> >
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com
> > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Eric Wieling
> > Sent: Thursday, June 03, 2004 23:36
> > To: asterisk-users at lists.digium.com
> > Subject: Re: [Asterisk-Users] miserable time with Cisco ATA186
> >
> > Perhaps, but *I* at least had decent luck with 2.16.1.  I suspect he has
> > allow=all and the codec that ends up being used is G723.1 and then, of
> > course, everything goes to hell.
> >
> >
> > On Thu, 2004-06-03 at 22:59, brian k. west wrote:
> > > because 2.16.1 has some bugs.. you need 2.16.2 or higher.
> > >
> > > bkw
> > >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>