[Asterisk-Users] Problem with T1 PRI line resetting/dropping calls.

[Gary Franczyk]

I am having a serious problem with my Asterisk system.  Every few days, my
PRI line resets and drops all calls.  I get these errors in the messages
log:

Jun  3 02:41:11 WARNING[11276]: PRI: Read on 39 failed: Unknown error 500
Jun  3 02:41:11 NOTICE[11276]: PRI got event: 6 on span 1
Jun  3 02:41:11 WARNING[12301]: Detected alarm on channel 1: Red Alarm
Jun  3 02:41:11 WARNING[12301]: Unable to disable echo cancellation on
channel 1
Jun  3 02:41:11 WARNING[12301]: Detected alarm on channel 2: Red Alarm
Jun  3 02:41:11 WARNING[12301]: Unable to disable echo cancellation on
channel 2
Jun  3 02:41:11 WARNING[12301]: Detected alarm on channel 3: Red Alarm
Jun  3 02:41:11 WARNING[12301]: Unable to disable echo cancellation on
channel 3
Jun  3 02:41:11 WARNING[12301]: Detected alarm on channel 4: Red Alarm
Jun  3 02:41:11 WARNING[12301]: Unable to disable echo cancellation on
channel 4
Jun  3 02:41:11 WARNING[12301]: Detected alarm on channel 5: Red Alarm
Jun  3 02:41:11 WARNING[12301]: Unable to disable echo cancellation on
channel 5
Jun  3 02:41:11 WARNING[12301]: Detected alarm on channel 6: Red Alarm

and so on...

Jun  3 02:41:11 WARNING[11276]: PRI: Read on 39 failed: Unknown error 500
Jun  3 02:41:11 NOTICE[11276]: PRI got event: 4 on span 1
Jun  3 02:41:16 NOTICE[12301]: Alarm cleared on channel 1
Jun  3 02:41:16 NOTICE[12301]: Alarm cleared on channel 2
Jun  3 02:41:16 NOTICE[12301]: Alarm cleared on channel 3
Jun  3 02:41:16 NOTICE[12301]: Alarm cleared on channel 4
Jun  3 02:41:16 NOTICE[12301]: Alarm cleared on channel 5

and so on...

I just noticed it the other day, but it seems like it may have been
happening since I installed the software and brought the system on line
several months ago.  I have upgraded to the latest stable release as of
6/1/2004.
The system is a Dell 1650 running RedHat 7.3 (running the single processor
kernel).  I am running a single PRI T1 line into a T400P (tor2) card.
Sprint provides the line timing and my zaptel.conf is as follows:

loadzone = us
defaultzone=us
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24

The zapata.conf is as follows:
[channels]
context=default
switchtype=national
rxwink=300              ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=10.0
txgain=3.0
group=1
callgroup=1
pickupgroup=1
immediate=no
signalling = pri_cpe
relaxdtmf=yes
channel => 1-23

Asterisk seems to run perfectly otherwise.  Can someone guide me to figure
out what is causing this?   Let me know if I need to provide any other
information.

Thanks

Gary F.