[Asterisk-Users] Re: Adtran TSU 600

[Bartosz Jozwiak]

I just did it today successfully. :)
The one BIG problem I have is: there is no battery when I pick up a phone
connected to FXS port.
My adtran tsu 600 has 24 fxs ports. Please could you tell me what kind of
configuration you
have in your adtran for fxs ports and what kind of configuration you have
for zaptel and zapata.
I have been struggling with adtran and T100p for 2 weeks now with no success
so far.

If it is no problem I could use your help.

Thank you in advance.

bartosz


----- Original Message ----- 
From: "Stephen R. Besch" <sbesch at acsu.buffalo.edu>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, June 02, 2004 10:17 AM
Subject: [Asterisk-Users] Re: Adtran TSU 600


> Bartosz Jozwiak wrote:
>
> > Hello,
> >
> > Did anybody successfully tried upgrade Adtran TSU 600 to
> > firmware which is working properly with T100P and asterisk ?
> >
> > B.
> >
>
> Yes, but it was a while ago (last August). I currently have the TSU600
> with 2 FXO/1 FXS cards running on a T100P with the only problem being
> that the FXS card is a little flakey, but this has no bearing on the
> T100P. I just downloaded the firmware and the stripped down version of
> T-Flash that Adtran provides for flashing the firmware. Once the serial
> link to the TSU was up and running properly, the firmware update went
> without a hitch.
>
> Stephen R. Besch
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>