[Asterisk-Users] Message light and paging on Zultys ZIP2, Uniden UIP200 time offset

[Erich W. Gunther]

I am trying to get a new Asterisk installation running using a Zultys
ZIP2 phone and a Uniden 200 phone.  I have the system working reasonably
well (although probably not optimal) except for a couple of items.

First, I can't get the voice mail message light to work on the Zultys
phone but it works just fine on the Uniden phone.

Second, the time presented on the Uniden UIP200 phone is 1 hour off from
the time of the asterisk server.  This is probably a Uniden issue but I
thought I would check here and see if anyone has had this problem
(BS4.54 firmware).  The Uniden configuration that is TFTP's to the phone
is set correctly for my UTC offset and DST status.

Finally, the Zultys ZIP2 has "paging support" using a stream on port
3771 by default.  Is this part of a standard RFC?  Does Asterisk support
this?

Erich


sip.conf excerpt

[6001]
type=friend
secret=blah
host=dynamic
mailbox=6001 at default
callerid=Uniden
dtmfmode=rfc2833
disallow=all
allow=ulaw
allow=alaw
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040601/2bb660e5/attachment.htm