[Asterisk-Users] Sipura-SPA2000 background noise

[lists at idontknow.com]

I hear the exact same noise on 2 units I purchased a few months ago.

I've been in contact with sipura support and they are willing to try 
RMA'ing one of my units.
As soon as I can get to the site with the sipura, I'll be sending it in.

I'll post my results to the list.

btw, I'd have to agree that its not comfort noise, its very similar (only 
much louder) to the "hiss" that the old digium fxs modules had on the tdm 
boards.

Mark


At 10:21 AM 6/1/2004, you wrote:
>Not really a comfort noise. I say anything and it doesent go away.  It
>sounds like a shielding issue.  I have tried to relocate the unit but it
>doesn't seem to help.
>
>
>
>-----Original Message-----
>From: Kevin Walsh [mailto:kevin at cursor.biz]
>Sent: Tuesday, June 01, 2004 11:46 AM
>To: asterisk-users at lists.digium.com
>Subject: RE: [Asterisk-Users] Sipura-SPA2000 background noise
>
>Kevin  [Asterisk at gtcus.com] wrote:
> > I have been using Cisco ATA's for analog connections and decided to
>give
> > a Sipura SPA-2000 a try. I noticed there is a fair amount of
>background
> > white noise that is noticeable, especially after breaking the dial
>tone.
> > After pressing a '1' to break the dial tone, there is a fair amount of
> > noise that is evident.  I do not notice this condition on the Cisco
> > ATA's.  I plugged the Sipura in the same location as the Cisco ATA.
> > Anyone else have this condition with the Sipura?
> >