[Asterisk-Users] zapras how to

[denz-infotechs]

By the way I forgot to mention that I connect to * over ISDN.  I read
somewhere that ISDN v.110 connection or v.120 connections are not supported
with zapras. Is it true ? Did the above LCP problem occur due to that ?

> That prob is solved here's latest problem,
>
> ==> /var/log/messages <==
> Jun  1 15:44:11 RAS pppd[1019]: Plugin zaptel.so loaded.
> Jun  1 15:44:11 RAS pppd[1019]: Zaptel Plugin Initialized
> Jun  1 15:44:11 RAS pppd[1019]: Using zaptel device 'stdin'
> Jun  1 15:44:11 RAS pppd[1019]: pppd 2.4.1b2 started by root, uid 0
> Jun  1 15:44:11 RAS pppd[1019]: Zaptel device is 'stdin'
> Jun  1 15:44:11 RAS pppd[1019]: Connected to zaptel device 'TE4/0/1/22'
(22)
> Jun  1 15:44:11 RAS pppd[1019]: Using interface ppp0
> Jun  1 15:44:11 RAS pppd[1019]: Connect: ppp0 <--> stdin
> Jun  1 15:44:11 RAS /etc/hotplug/net.agent: assuming ppp0 is already up
>
> ==> /var/log/ppp-debug <==
> Jun  1 15:44:11 RAS pppd[1019]: Plugin zaptel.so loaded.
> Jun  1 15:44:11 RAS pppd[1019]: Zaptel Plugin Initialized
> Jun  1 15:44:11 RAS pppd[1019]: Using zaptel device 'stdin'
> Jun  1 15:44:11 RAS pppd[1019]: pppd 2.4.1b2 started by root, uid 0
> Jun  1 15:44:11 RAS pppd[1019]: Zaptel device is 'stdin'
> Jun  1 15:44:11 RAS pppd[1019]: Connected to zaptel device 'TE4/0/1/22'
(22)
> Jun  1 15:44:11 RAS pppd[1019]: using channel 6
> Jun  1 15:44:11 RAS pppd[1019]: Using interface ppp0
> Jun  1 15:44:11 RAS pppd[1019]: Connect: ppp0 <--> stdin
> Jun  1 15:44:11 RAS pppd[1019]: sent [LCP ConfReq id=0x1 <magic
0x22d75992>]
>
> ==> /var/log/messages <==
> Jun  1 15:44:41 RAS pppd[1019]: LCP: timeout sending Config-Requests
> Jun  1 15:44:41 RAS pppd[1019]: Connection terminated.
> Jun  1 15:44:41 RAS pppd[1019]: Disconnect from zaptel
> Jun  1 15:44:41 RAS pppd[1019]: Exit.
> Jun  1 15:44:41 RAS /etc/hotplug/net.agent: NET unregister event not
> supported
>
> ==> /var/log/ppp-debug <==
> Jun  1 15:44:38 RAS last message repeated 9 times
> Jun  1 15:44:41 RAS pppd[1019]: LCP: timeout sending Config-Requests
> Jun  1 15:44:41 RAS pppd[1019]: Connection terminated.
> Jun  1 15:44:41 RAS pppd[1019]: Disconnect from zaptel
> Jun  1 15:44:41 RAS pppd[1019]: Exit.
>
> It has something to do with LCP. Are we moving in the correct path here ?
> And after 1 minute the phone says the "call was not  answered"
>
> PLATFORM: redhat 9.0
>
>
> <hi!
>
> <I'm trying to get zapras working in GSM csd network. Whenever a dialup
call
> is initiated from the mobile <to the * gateway the following appears in
the
> log and zapras terminates. Phone gives the error dialup not <answered.
>
> <==> /var/log/messages <==
> <pppd[2310]: Plugin zaptel.so loaded.
> <pppd[2310]: Zaptel Plugin Initialized
> <pppd[2310]: Using zaptel device 'stdin'
> <pppd[2310]: pppd 2.4.1b2 started by root, uid 0
> <pppd[2310]: Zaptel device is 'stdin'
> <kernel: Zaptel: Zaptel PPP support not compiled in
> <pppd[2310]: Unable to put device 'stdin' into HDLC mode
> <pppd[2310]: Exit.
>
>
> <I patched the given pppd with the two patches
> <ppp-2.4.1-pppoe.patch4, ppp-2.4.1b2-zaptel.patch
>
> <I recompiled my kernel to spupport,
> <Network device support -> PPP over Ethernet (EXPERIMENTAL)
> <But the result didn't change.
>
> <And kernel has this option ticked ( * ),
> <My kenerl has ISDN support -> Support synchronous PPP
>
>
> <what could be wrong here ? Am I missing anything in the kernel. Or ppp
not
> configured not properly ? <Need ur thoughts on this.
>
> <thanks in advance,
> <denzel.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>