[Asterisk-Users] New to IP-PBX

[Chris Shaw]

The Dialogic boards are intel's version of the wildcard adaptors... I
believe the one he's referring to has like 4 FXO Ports, just like the
TDM400P...

I think I've read that dialogic boards *ARE* compatible with *, but have not
seen any specific examples of such a configuration...


----- Original Message -----
From: "Jay Milk" <jay at skimmilk.net>
To: <asterisk-users at lists.digium.com>
Sent: Friday, July 30, 2004 1:23 PM
Subject: RE: [Asterisk-Users] New to IP-PBX


> To connect to the PSTN (existing line), you'll need an FXO port.
> Easiest way to get one is to put in a Digium X100P card.  Not sure
> whether the Dialogic board is compatible with Asterisk, nor even what it
> does.
>
> > -----Original Message-----
> > From: Duraid Abbas [mailto:duraid at icogo.com]
> > Sent: Friday, July 30, 2004 1:39 PM
> > To: asterisk-users at lists.digium.com
> > Subject: [Asterisk-Users] New to IP-PBX
> >
> >
> > Hi,
> >
> > I'd really appreciate it if you can explain this to me.
> >
> > I have a D/41JCT-LS Dialogic board and I want to use it as an
> > IP-PBX. I'm new to IP Telephony and telephony and general and
> > I researched a lot but still confused about what I really need.
> >
> > I know that I can setup an IP-Telephony for my LAN using a
> > SIP server and SIP compatible software phones. But the
> > challenge is how can I connect to the PSTN so that I can send
> > and receive calls?
> >
> > I came through a lot of terms like VoIP gateway and stuff
> > like that but still don't know what I really need. Can you help?
> >
> > Thanks in advance
> >
> > Duraid
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users