[Asterisk-Users] Has anyone tried using a Sipura-3000 as an FXO device for *?

[DUSTIN WILDES]

I found it was worse when using the G726 or G723 codecs, but if you used the G711 codec, the DTMF echo was hardly noticable.  I was using the latest image:  2.0.9d



-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Rich Adamson
Sent: Wednesday, July 28, 2004 8:31 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Has anyone tried using a Sipura-3000 as an
FXO device for *?


> On Tue, 2004-07-27 at 15:52, Carmi Weinzweig wrote:
> > I am considering using Sipura-3000s as FXO devices for my * system. Has 
> > anyone tried them in that configuration? They interest me because they 
> > need no PCI slots and therefore no drivers. I would much prefer not to 
> > have any special kernel requirements for my system.
> 
> A number of us are using SPA-3000s for this exact purpose, including
> myself. Works pretty well.
> 
> -- PhoneBoy

Have you found a way to get rid of the dial tone and dtmf tones when
placing an outbound pstn call through the 3000?

In my config, the call completes as expected however the dialtone and
dtmf tones are slightly annoying.

Rich


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users