[Asterisk-Users] Re: TDM400P Internal Extenion Config

[Nick Cobley]

Forgot to mention, both modules are show in ztcfg fine, see below:

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)

2 channels configured.

and zap show channel 2 give the following:

Channel: 2
File Descriptor: 19
Span: 1
Extension:
Dialing: no
Context: internal
Caller ID string: "Fax" <310>
Destroy: 0
Signalling Type: FXO Kewlstart
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Actual Hookstate: Onhook


Okay, so now I'm going to lie down in a dark room.

Cheers

Nick Cobley wrote:

> Hopefully someone here can save my sanity. I have been trying to solve 
> this problem for days now, but just cant put my finger on it. Im new 
> to * so I have probably done something stupid!
>
> I have a TDM400P with one FXO module and a FXS module. The main 
> problem I have is not being able to get the extension attached to the 
> FXS module to ring or be able to make calls. It gets a dialtone fine 
> but I guess this doesnt really mean all that much.
>
> If I dial the extension I just get a 404 error on the phone 
> (Grandstream), but no errors at all on the console. I am using 
> CVS-HEAD-07/14/04.  Here is a snippet of what I have in the various 
> config files.
>
>
> zaptel.conf
>
> loadzone=au
> defaultzone=au
> fxsks=1
> fxoks=2
>
> zapata.conf
>
> [channels]
> context=incoming
> switchtype=national
> signalling=fxs_ks
> usecallerid=yes
> hidecallerid=no
> callwaiting=no
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> txgain=0.0
> rxgain=0.0
> group=1
> callgroup=1
> pickupgroup=1-4
> immediate=no
> busydetect=yes
> busycount=7
>
> callerid=asreceived
> channel => 1
> context=internal
> group=2
>
> signalling=fxo_ks
> callerid="Fax" <310>
>
> channel => 2
>
>
> extensions.conf
>
> [general]
> static=yes
> writeprotect=no
>
> [globals]
>
> [sip]
> exten => 301,1,Dial(SIP/Nick,20,tr)
> exten => 302,1,Dial(SIP/Sharon,20,tr)
> exten => 1000,1,Dial(SIP/Nick&SIP/Sharon,20,tr)
> exten => 302,2,VoiceMail,u302
> exten => 301,2,VoiceMail,u301
> exten => 1000,2,VoiceMail,u9999
> exten => 1000,102,VoiceMail,b9999
> exten => 1001,1,Ringing
> exten => 1001,2,Wait(2)
> exten => 1001,3,VoicemailMain
> include => outgoing
>
> [incoming]
> exten => s,1,Dial(SIP/Nick&SIP/Sharon,20,tr)
>
> [outgoing]
> exten => _7.,1,Dial(IAX2/login:passwd at XXX.XXX.XXX>XXX/${EXTEN:1})
> exten => 5.,1,Dial,Zap/1/${EXTEN:1}
>
> [9103]
> exten => 21060,1,Dial(SIP/Nick)
> exten => 21062,1,Dial(SIP/Sharon)
>
> [internal]
> exten => 310,1,Dial,Zap/2
>
>
>
> If I try to make any calls from the extension connected to the fxs 
> module i just get what sounds like a busy tone. Looking at the console 
> it generally give the error "zt_set_hook: zt hook failed Device or 
> resource busy". It only gives this error when it goes off hook and 
> number dialed.
>
> Only other information I can provide is a couple errors when asterisk 
> start up. I get the following:
>
> "Unable to open /dev/dsp: No such device"
> "Unable to get our IP address, Skinny disable"
> "Ignoring switchtype"
>
> Have not been able to dig out vast amounts of information on the 
> above, but what I have found didnt seem to point to my problem, but 
> then what do I know!
>
> If anyone can help I would appreciate it! I'm going crazy here!
>
> Kind regards
> Nick
>
>