[Asterisk-Users] Updated RPMS for Asterisk-1.0 RC1
Greg Boehnlein
damin at nacs.net
Sat Jul 17 07:12:23 MST 2004
Hello all,
Hot on the announcement this morning by Mark, I have updated and
rebuilt new Asterisk RPMS for RedHat 7.3, 8, 9 and Fedora Core 1. Please
feel free to install these and beat them up. The usual disclaimer
applies.. These haven't been tested, not reccomended for production use,
don't bug Digium for support of these, blah blah blah....
You can find the updated RPMS and Source at:
ftp://ftp.nacs.net/asterisk
README
------
Asterisk RPMS for RedHat
------------------------
Welcome to the wonderful world of Open Source VoIP!
Asterisk is a complete PBX in software. It runs on Linux and
provides all of the features you would expect from a PBX and
more. Asterisk does voice over IP in three protocols, and can
inter operate with almost all standards-based telephony equipment
using relatively inexpensive hardware.
The RPMS contained on this FTP site are experimental builds for
RedHat and are not officially supported or sanctioned by Digium.
Therefore, support will not be provided by Digium. Please be
respectful of this fact and use the high quality, extensive
resources provided by the Asterisk community for support. Chances
are that all of the questions you will ask have been answered in
the past. Take the time to research before you ask!
While the maintainers of these RPMS have made every effort to
ensure the widest level of compatibility and stability, every
Asterisk installation is different. Therefore, we would caution
you against using these on Production systems without proper
testing.
Currently, these RPMS are being maintained by Gregory Boehnlein
<damin at nacs.net>. Please help the cause by sending patches,
updates, suggestions and improvements to me in E-mail.
Quickstart
----------
Download the appropriate RPMS for your distribution and install
in the following order:
rpm -Uvh libpri*
rpm -Uvh zaptel*
rpm -Uvh kernel-module-zaptel*
rpm -Uvh asterisk*
Configuration
-------------
Installing the RPMS will not yield a working system and to get
anything useful, you will need to configure Asterisk. Please
review the following PDF file information on getting started
with Asterisk: http://www.digium.com/handbook-draft.pdf
The Asterisk Wiki represents the collective knowledge of the
community and is a resource that you will use often. Please help
the cause by reviewing, correcting and updating the information
found at: http://www.voip-info.org/wiki-Asterisk
Special Thanks
--------------
These RPMS are made possible from a combination of work that I
have done and the excellent work of Tom Moertel
(http://community.moertel.com) for the Zaptel RPM.
--
Vice President of N2Net, a New Age Consulting Service, Inc. Company
http://www.n2net.net Where everything clicks into place!
KP-216-121-ST
More information about the asterisk-users
mailing list