[Asterisk-Users] Feature Group D

[Mike Machado]

Yes, this is working for me.

The remote side must send *<ani>*<dnis>* for this to work. If asterisk
does not detect the first *, then it prints the message you are seeing.

On Fri, 2004-07-16 at 07:18, Joseph wrote:
> Is anyone using Feature Group D with a digium 405P card
> and get the ANI spill to work (callerid)?
> 
> I can get the dnis to work fine.
> 
> But not the caller id.
> 
> Here is the error I get:
> chan_zap.c:4628 ss_thread: Got a non-Feature Group D input on
> channel 3.  Assuming E&M Wink instead
> 
> zapata.conf: **********
> group = 3
> callerid=asreceived
> context=incoming
> usecallerid=yes
> immediate=no
> signalling=featd
> channel=1-24
> ***********************
> 
> zaptel.conf
> span=1,1,0,d4,ami
> e&m=1-24
> 
> How can I debug this?
> We have tried everything we can think of on the provider side...
> Would anyone perchance have a sample of the settings needed
> on  the provider side to make featd work right?
> 
> Thanks.