[Asterisk-Users] SoxMix - Fails to Execute
Chris Smales - Magenta Solutions
chris.smales at magentasolutions.net
Thu Jul 15 14:15:22 MST 2004
I have Asterisk configured to record calls. Both in and out record ok
but SoxMix fails to join the two files.
The error from the CLI is as follows:
Execute of ( nice -n 19 soxmix
/var/spool/asterisk/monitor/Support-in.wav
/var/spool/asterisk/monitor/Support-out.wav
/var/spool/asterisk/monitor/Support.wav && rm -f
/var/spool/asterisk/monitor/Support-* ) & failed.
If I run exactly the same command from Linux it runs ok and the two
files get mixed.
Can anybody suggest why Asterisk has a problem running the command?
Thanks,
Chris
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of
asterisk-users-request at lists.digium.com
Sent: 15 July 2004 21:50
To: asterisk-users at lists.digium.com
Subject: Asterisk-Users digest, Vol 1 #4559 - 12 msgs
Send Asterisk-Users mailing list submissions to
asterisk-users at lists.digium.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.digium.com/mailman/listinfo/asterisk-users
or, via email, send a message with subject or body 'help' to
asterisk-users-request at lists.digium.com
You can reach the person managing the list at
asterisk-users-admin at lists.digium.com
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Asterisk-Users digest..."
Today's Topics:
1. Re: Bounty! For help with echo cancellation code.
(echo-asterisk at secondphone.com)
2. RE: Updated Grandstream configurator (Mike Reed)
3. RE: Re: VoicePulse changes (Mike Reed)
4. freenode #asterisk IRC channel identd problem (Nathan Alpert)
5. Re: freenode #asterisk IRC channel identd problem (Olle E.
Johansson)
6. Re: Re: Problem loadin oh323 solved (ruixun wu)
7. bristuff 0.0.3 ? (Bjoern Adler)
8. RE: VoicePulse changes (daryl at introspect.net)
9. RE: freenode #asterisk IRC channel identd problem (Mike Reed)
10. Re: freenode #asterisk IRC channel identd problem (Steven
Critchfield)
11. Re: Updated Grandstream configurator (Stephen R. Besch)
12. Re: Updated Grandstream configurator (Stephen R. Besch)
--__--__--
Message: 1
Date: Thu, 15 Jul 2004 12:39:45 -0700
From: echo-asterisk at secondphone.com
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Bounty! For help with echo cancellation
code.
Reply-To: asterisk-users at lists.digium.com
On Wed, Jul 14, 2004 at 10:14:19AM -0700, Bob Knight wrote:
> echo-asterisk at secondphone.com wrote:
> >>>From the CLI and during a call I want to be able to:
> >
> > *** Pulse the outgoing line and record at least 50 ms of the
> > incoming line.
> >
> > The pulse waveform must be specifiable as a series of
amplitudes
> > for each 1/8000 sec time slot. It would be best of these
values
> > could be read from a file specified on the CLI command line.
> >
> > Timing should be synced between the pulse and the echo so that
the
> > delay from the pulse to the echo can be accurately determined.
> >
> > Echo cancellation should be disabled during this operation.
> >
> > This would operate similar to the echo-training code that
operates
> > at the initiation of a call except that this could be done at
> > any time.
> >
> > The initial pulse and any echoes can be combined and saved in a
> > single channel.
> >
> > Output should go to a file and should be in a simple format
that
> > a program such as Audacity can read, display and play.
> >
> >
> > *** Pulse the outgoing line and record at least 50 ms of the
> > incoming line.
> >
> > Same as above EXCEPT echo cancellation would not be disabled
during
> > this test and the results of the echo cancellation operations
should
> > be recorded and saved in a separate channel.
> >
> >
> > *** Change variables used to control echo cancellation.
> >
> > Only the code in mec2.h is of interest.
> >
> > I will help identify the variables and modify the mec2.h code
as
> > needed to accomplish this goal.
> >
> > There are a lot of parameters in mec2.h that may affect the
quality
> > of the echo cancellation. I want to be able to adjust them 'on
the
> > fly' and be able to immediately hear the results.
> >
> >
> >I am open to alternative proposals which would accomplish the same
goals.
> >
> >Name your price.
>
> How about being able to "see" the results real time?
> I use a package called SMAART from siasoft.com.
> It is a dual channel spectrum analyzer.
> Run the output line as your reference channel and the input line as
> your measurement channel.
>
> You can get great info from the impulse response and transfer
> function.
>
> You could also use this to compare different codecs.
> The impulse function will tell you how long it takes.
> The transfer function will tell you just how good a job it did at
> reconstruction the original audio.
>
Almost 20 years ago I wrote my own digital spectrum analyzer code which
I then used to do my research. Provided that SMAART can fully utilize
the transfer function (do convolutions etc) it would may be useful, but
spectrum analysis is not the hard part. Controlling and getting the
data out of zaptel.o is the hard part and help with that is what is
requested in the Bounty!
echo
> --
> Bob Knight
> [-w] the work option
> bk at minusw.com
> 925-449-9163
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--__--__--
Message: 2
Subject: RE: [Asterisk-Users] Updated Grandstream configurator
Date: Thu, 15 Jul 2004 14:48:10 -0500
From: "Mike Reed" <mike.reed at voxpath.com>
To: <asterisk-users at lists.digium.com>
Reply-To: asterisk-users at lists.digium.com
=20
> -----Original Message-----
> The bad part is that starting with SP2 on w2k ms EULA has=20 changed
>to include=20 your agreement to let microsoft not only see, what you
>have=20 on your computer,=20 but also install software on it. This
>has caused a big=20 corporate hold on=20 updating beyond SP2. The
>medical industry in particular is=20 having a hard=20 time, as ms has
>not signed a non disclosure to have access to=20 personal=20 medical
>information.
>=20
> - --=20
> Steve
This simply isn't true. The medical law you're referring to is HIPPA,
and there's *nothing* in the Microsoft EULA that allows them to read
otherwise proprietary or personal information off your system.
While I'm not a Microsoft apologist, I can stand to see them slammed
from purely ignorant disinformation.
Mike :)
--__--__--
Message: 3
Subject: RE: [Asterisk-Users] Re: VoicePulse changes
Date: Thu, 15 Jul 2004 14:50:01 -0500
From: "Mike Reed" <mike.reed at voxpath.com>
To: <asterisk-users at lists.digium.com>
Reply-To: asterisk-users at lists.digium.com
+3, Funny=20
> -----Original Message-----
> Maybe if you circle the globe enough times, crossing the=20
>international=20 date line each time, of course, it would be possible
>to get to August=20 15th yesterday ;-) =20 SRB
--__--__--
Message: 4
From: Nathan Alpert <asterisk at demicrosystems.com>
To: asterisk-users at lists.digium.com
Organization: Digital Evolution Microsystems
Date: 15 Jul 2004 14:54:01 -0500
Subject: [Asterisk-Users] freenode #asterisk IRC channel identd problem
Reply-To: asterisk-users at lists.digium.com
Sorry to ask this question here since it's related to IRC and not
Asterisk, but I am having trouble logging into the #asterisk IRC channel
on freenode and was wondering if anyone else has had this problem and
solved it.
So here's the situation: Whenever I try to login to the #asterisk
channel I get a message like "you must be identified to login to this
channel." So after doing a little research on this, I found that the
identity thing is related to the "identd" server used to identify
computers on a network. Apparently in Linux there is some identd server
thing that needs to be configured so I didn't mess with this and used
mIRC on Windows which has a identd server built into the program. I have
my firewall forwarding port 113 to the computer running mIRC (which is
apparently needed to listen for the identd requests) and the SOB still
gives me the same message and I can't get into the #asterisk channel.
Has anyone else had this problem and solved it?
Thanks,
Nate Alpert
asterisk at demicrosystems.com
--__--__--
Message: 5
Date: Thu, 15 Jul 2004 22:07:36 +0200
From: "Olle E. Johansson" <oej at edvina.net>
Organization: Edvina AB
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] freenode #asterisk IRC channel identd
problem
Reply-To: asterisk-users at lists.digium.com
Nathan Alpert wrote:
> Sorry to ask this question here since it's related to IRC and not
> Asterisk, but I am having trouble logging into the #asterisk IRC
channel
> on freenode and was wondering if anyone else has had this problem and
> solved it.
>
> So here's the situation: Whenever I try to login to the #asterisk
> channel I get a message like "you must be identified to login to this
> channel." So after doing a little research on this, I found that the
> identity thing is related to the "identd" server used to identify
Please read the following helptext from Asterisk.org:
"The Asterisk channel now requires that your nick be registered with the
Freenode Nickerv in order to participate. This measure has been
taken to combat spambots and the like. We apologize for the
inconvenience. Please "/msg NickServ help register" in your IRC client
to learn
how to register your nick"
This has nothing to do with identd. Run the command and you'll get
assistance.
/O
--__--__--
Message: 6
Date: Thu, 15 Jul 2004 16:10:12 -0400 (EDT)
From: ruixun wu <ruixunwu at yahoo.ca>
Subject: Re: [Asterisk-Users] Re: Problem loadin oh323 solved
To: asterisk-users at lists.digium.com
Reply-To: asterisk-users at lists.digium.com
Hi,
Thanks for you reply.
I download glibc-2.3.2.tar.gz and
glibc-linuxthreads-2.3.2.tar.gz. The configuration
process was fine, no error occured(I typed
glibc-2.3.2/configure --enable-add-ons=linuxthreads).
But there was a strange things happened in make
process. The make process kept compling the files
located in directory glibc-2.3.2/csu and wouldn't
stop. At first I didn't notice this and waiting for 4
hours.
Do you have any idea?
Thanks a lot
Rui
--- Lars Degenhardt <lars at lcc-degenhardt.de> wrote: >
ruixun wu wrote:
> > Hello Soumaya,
> >
> > It's great that you solved the problem.
> > But I still don't know how to do. What's the
> > problem with redhat 9.0? Could you tell me more
> > details?
> >
> > Thanks a lot
> > Rui
> >
>
> as I am the "kind member" I can tell you also:
>
> get the latest glibc and libssl updates and
> recompile the whole bunch
> (pwlib/opneh323/asterisk-oh323)
>
> >
> > Fathallah Soumaya wrote:
> >
> >>Hello everybody,
> >>
> >>The problem that I had withj loading oh323 module
> >
> > was finally solved
> >
> >>thanks to the help of a kind member of this list,
> it
> >
> > was due to a
> >
>
> --
> Lars Degenhardt
> phon: +49 76814749263| mobile: +49 1736936968| box:
> +49 891488262647
> BOFH excuse #83:
> Support staff hung over, send aspirin and come back
> LATER.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>
>
http://lists.digium.com/mailman/listinfo/asterisk-users
>
______________________________________________________________________
Post your free ad now! http://personals.yahoo.ca
--__--__--
Message: 7
From: "Bjoern Adler" <asterisk at brainhawk.de>
To: <asterisk-users at lists.digium.com>
Date: Thu, 15 Jul 2004 22:19:25 +0200
Subject: [Asterisk-Users] bristuff 0.0.3 ?
Reply-To: asterisk-users at lists.digium.com
Hi all,
are there any news about bristuff 0.0.3, which compiles against CVS =
HEAD?
Any informations regarding the timeframe of appearance would be =
appreciated...
Greetings
Bjoern
--__--__--
Message: 8
Subject: RE: [Asterisk-Users] VoicePulse changes
Date: Thu, 15 Jul 2004 16:21:42 -0400
From: <daryl at introspect.net>
To: <asterisk-users at lists.digium.com>
Reply-To: asterisk-users at lists.digium.com
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com=20
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Jay Milk
> Sent: Thursday, July 15, 2004 1:00 PM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] VoicePulse changes
>=20
> Welcome back to July. How's the future?
>=20
> There's one rather reliable, albeit not very popular provider=20
> with DIDs in the Philly area: Vonage. Their softphone=20
[...]
I, as well as almost everyone else on this list, is very well aware of
Vonage. As soon as they start officially supporting Asterisk and
specify things like whether you can have concurrent inbound calls
without additional charge, calls rolling over, etc it just might be a
viable option.
No, my Asterisk installation is not in my basement being used as a
glorified answering machine. People who use these things for actual
business systems need more than "I played around with <x> and got <y> to
work! Cool! Maybe it will even keep working if <x> doesn't decide to
change it or start charging me, etc."
For now, that leaves people in my position paying for PRIs or POTS lines
just to be sure.
Daryl
--__--__--
Message: 9
Subject: RE: [Asterisk-Users] freenode #asterisk IRC channel identd
problem
Date: Thu, 15 Jul 2004 15:31:07 -0500
From: "Mike Reed" <mike.reed at voxpath.com>
To: <asterisk-users at lists.digium.com>
Cc: <asterisk at demicrosystems.com>
Reply-To: asterisk-users at lists.digium.com
It's got nothing to do with IdentD and everything to do with registering
your nick on the net/node.
Mike ;)=20
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com=20
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of=20
> Nathan Alpert
> Sent: Thursday, July 15, 2004 2:54 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] freenode #asterisk IRC channel=20
> identd problem
>=20
> Sorry to ask this question here since it's related to IRC and not
> Asterisk, but I am having trouble logging into the #asterisk=20
> IRC channel
> on freenode and was wondering if anyone else has had this problem and
> solved it.
>=20
> So here's the situation: Whenever I try to login to the #asterisk
> channel I get a message like "you must be identified to login to this
> channel." So after doing a little research on this, I found that the
> identity thing is related to the "identd" server used to identify
> computers on a network. Apparently in Linux there is some=20
> identd server
> thing that needs to be configured so I didn't mess with this and used
> mIRC on Windows which has a identd server built into the=20
> program. I have
> my firewall forwarding port 113 to the computer running mIRC (which is
> apparently needed to listen for the identd requests) and the SOB still
> gives me the same message and I can't get into the #asterisk channel.
>=20
> Has anyone else had this problem and solved it?=20
>=20
> Thanks,
> Nate Alpert
> asterisk at demicrosystems.com
>=20
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>=20
>=20
--__--__--
Message: 10
Subject: Re: [Asterisk-Users] freenode #asterisk IRC channel identd
problem
From: Steven Critchfield <critch at basesys.com>
To: asterisk-users at lists.digium.com
Date: Thu, 15 Jul 2004 15:31:35 -0500
Reply-To: asterisk-users at lists.digium.com
On Thu, 2004-07-15 at 14:54, Nathan Alpert wrote:
> Sorry to ask this question here since it's related to IRC and not
> Asterisk, but I am having trouble logging into the #asterisk IRC
channel
> on freenode and was wondering if anyone else has had this problem and
> solved it.
>
> So here's the situation: Whenever I try to login to the #asterisk
> channel I get a message like "you must be identified to login to this
> channel." So after doing a little research on this, I found that the
> identity thing is related to the "identd" server used to identify
> computers on a network. Apparently in Linux there is some identd
server
> thing that needs to be configured so I didn't mess with this and used
> mIRC on Windows which has a identd server built into the program. I
have
> my firewall forwarding port 113 to the computer running mIRC (which is
> apparently needed to listen for the identd requests) and the SOB still
> gives me the same message and I can't get into the #asterisk channel.
>
> Has anyone else had this problem and solved it?
search THIS list to find that you must be registered to nickserv to get
in the channel. It has been discussed many times and at length.
--
Steven Critchfield <critch at basesys.com>
--__--__--
Message: 11
To: asterisk-users at lists.digium.com
From: "Stephen R. Besch" <sbesch at acsu.buffalo.edu>
Date: Thu, 15 Jul 2004 16:31:47 -0400
Subject: [Asterisk-Users] Re: Updated Grandstream configurator
Reply-To: asterisk-users at lists.digium.com
Steve wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Thursday 08 July 2004 05:45 pm, Stephen R. Besch wrote:
>
>>The most recent version of GSConfigure is available at
>>www.buffalo.edu/~sbesch Several serious bugs that kept the program
from
>>getting started have been ferreted out and corrected with the help of
>>Bruce Komito. The program is now actually running on someone's machine
>>other than mine. I have built this version with the oldest copies of
the
>>system dll's that I could find inn an effort to solve the VB setup
bug,
>>so, hopefully it will no longer send anyone through multiple restarts.
>>You should have at least SP3, or even better, SP4 on Win2k. I believe
it
>>will run on Win9x, but I have not tested it and can make no
guarantees.
>>
>>Steve Besch
>
>
> The bad part is that starting with SP2 on w2k ms EULA has changed to
include
> your agreement to let microsoft not only see, what you have on your
computer,
> but also install software on it. This has caused a big corporate hold
on
> updating beyond SP2. The medical industry in particular is having a
hard
> time, as ms has not signed a non disclosure to have access to personal
> medical information.
>
> - --
> Steve
>
> "They that would give up essential liberty for temporary safety
deserve
> neither liberty nor safety."
> Benjamin Franklin
>
Since I am quite sure that the program will run without updating any of
the dll's, what I should do is simply register them with regsvr32 from a
batch job and bag the VB6 installer altogether. Before I do that though,
can anyone tell me if regsvr32 ships with standard Win2k/WinXP?
Stephen R. Besch
--__--__--
Message: 12
Date: Thu, 15 Jul 2004 16:31:47 -0400
From: "Stephen R. Besch" <sbesch at acsu.buffalo.edu>
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Re: Updated Grandstream configurator
Reply-To: asterisk-users at lists.digium.com
Steve wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Thursday 08 July 2004 05:45 pm, Stephen R. Besch wrote:
>
>>The most recent version of GSConfigure is available at
>>www.buffalo.edu/~sbesch Several serious bugs that kept the program
from
>>getting started have been ferreted out and corrected with the help of
>>Bruce Komito. The program is now actually running on someone's machine
>>other than mine. I have built this version with the oldest copies of
the
>>system dll's that I could find inn an effort to solve the VB setup
bug,
>>so, hopefully it will no longer send anyone through multiple restarts.
>>You should have at least SP3, or even better, SP4 on Win2k. I believe
it
>>will run on Win9x, but I have not tested it and can make no
guarantees.
>>
>>Steve Besch
>
>
> The bad part is that starting with SP2 on w2k ms EULA has changed to
include
> your agreement to let microsoft not only see, what you have on your
computer,
> but also install software on it. This has caused a big corporate hold
on
> updating beyond SP2. The medical industry in particular is having a
hard
> time, as ms has not signed a non disclosure to have access to personal
> medical information.
>
> - --
> Steve
>
> "They that would give up essential liberty for temporary safety
deserve
> neither liberty nor safety."
> Benjamin Franklin
>
Since I am quite sure that the program will run without updating any of
the dll's, what I should do is simply register them with regsvr32 from a
batch job and bag the VB6 installer altogether. Before I do that though,
can anyone tell me if regsvr32 ships with standard Win2k/WinXP?
Stephen R. Besch
--__--__--
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
End of Asterisk-Users Digest
More information about the asterisk-users
mailing list