[Asterisk-Users] CISCO 7960 VLAN

[Kevin]

Shaun,

Thanks for the feedback.  I am aware of the ADMIN VLAN setting and
mentioned it below in my original post.  I was referring to the access
port (The additional 10/100 port). I wanted to change the access port as
it handles tagged or untagged VLAN frames.

Kevin


-----Original Message-----
From: Shaun Ewing [mailto:sewing at gmail.com] 
Sent: Tuesday, July 13, 2004 2:18 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] CISCO 7960 VLAN

As far as I know, if your switch doesn't support CDP, you need to
configure the VLAN on the phone.

It's in Settings -> Network Configuration -> Option 22 "Admin VLAN Id".

You will need to unlock the configuration first (method depends on the
SIP firmware version you have).

-Shaun

On Tue, 13 Jul 2004 01:16:03 -0400, Kevin <asterisk at gtcus.com> wrote:
> I noticed in the Cisco documentation that the access port( the port to
> hook to a PC) on the 7960 can be configured via CDP with a layer3
Cisco
> switch.
> I also see where in the SIP configuration that you can specify the
ADMIN
> VAN.
> 
> Does anyone know to configure the 7960 access port to use a different
> VLAN using a non Cisco switch?
> 
> Thanks,
> 
> Kevin
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users