[Asterisk-Users] bristuff - hfc card + x100p

[Tomaz]

just one thing  I forgot:

less /proc/zaptel/3

Span 3: WCFXO/0 "Wildcard X101P Board 1" RED

           7 WCFXO/0/0
/proc/zaptel/3 (END)

if this may helps?

thankyou,
Tomaz


Tomaz wrote:

>
> hi,
>
> i have two hfc isdn cards and one x100p
> modules are loaded in order:
> -----------------
> insmod zaptel
> insmod zaphfc modes=0
> insmod wcfxo
> ztcfg
> --------------------
>
>
> cat /etc/zaptel.conf
> loadzone=nl
> defaultzone=nl
> span=1,1,3,ccs,ami
> bchan=1-2
> dchan=3
> #
> loadzone=nl
> defaultzone=nl
> span=2,1,3,ccs,ami
> bchan=4-5
> dchan=6
> #
> loadzone=nl
> defaultzone=nl
> fxsks=7
>
>
>
> ---------------------------
> and in zapata.conf i have:
>
> [channels]
> switchtype = euroisdn
> signalling = bri_cpe
> prilocaldialplan=national
> pridialplan = unknown
> echocancel=yes
> echocancelwhenbridged=yes
> ;echotrainig=yes
> overlapdial=no
> immediate=no
> group = 3
> context=isdn
> channel => 1-2
> ;
> switchtype = euroisdn
> signalling = bri_cpe
> prilocaldialplan=national
> pridialplan = unknown
> echocancel=yes
> echocancelwhenbridged=yes
> ;echotrainig=yes
> overlapdial=no
> immediate=no
> group = 3
> context=isdn
> channel => 4-5
> ;
> signalling=fxs_ks
> channel=7
> ------------------------------------
>
>
> so after that i load asterisk -vvvvvc
> and get no errors at all:
>
> [chan_zap.so] => (Zapata Telephony w/PRI)
>  == Parsing '/etc/asterisk/zapata.conf': Found
>    -- Registered channel 1, PRI Signalling signalling
>    -- Registered channel 2, PRI Signalling signalling
>    -- Registered channel 4, PRI Signalling signalling
>    -- Registered channel 5, PRI Signalling signalling
>    -- Registered channel 7, FXS Kewlstart signalling
>  == Starting D-Channel on span 1
>  == Starting D-Channel on span 2
>  == Registered channel type 'Zap' (Zapata Telephony Driver w/PRI)
>  == Registered channel type 'Tor' (Zapata Telephony Driver w/PRI)
>
> isdn is working ok but with channel 7 (x100p) is something wrong .. 
> but what?
>
>
> Executing Dial("SIP/1-85f5", "Zap/7/BYEXTENSION|130|t|r|f") in new stack
> Jul  9 14:43:32 NOTICE[311316]: app_dial.c:559 dial_exec: Unable to 
> create channel of type 'Zap'
>  == Everyone is busy at this time
>
>
> thankyou!
> Tomaz
>
>
>
>
>
> Robinson Tim-W10277 wrote:
>
>> Yes, me. What problems are you having?
>>
>> -----Original Message-----
>> From: asterisk-users-admin at lists.digium.com
>> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Tomaz
>> Sent: 09 July 2004 09:07
>> To: asterisk-users at lists.digium.com
>> Subject: [Asterisk-Users] bristuff - hfc card + x100p
>>
>>
>> hi!
>>
>> Anyone on list has working asterisk box with hfc based card 
>> (bristuff)  and a x100p adapter?
>> Becouse together in box I can't get it working in any way ..
>>
>> thank you,
>> Tomaz
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>  
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users