[Asterisk-Users] E100P

[Scott Stingel]

Hello-

Yes, they have the same artwork.  You can tell an E100P by looking at the
clock generator chip at U7.  An E1 should be marked with 2.*** MHz (can't
read all the digits on mine)

Cheers
Scott 


Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Ing. Angel Gomez
Sent: Wednesday, July 07, 2004 5:46 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] E100P

Hi, i just received an E100P, this is the first one I have ever seen, and
notice that the board reads T100P. Is this right ? The antistatic bag had a
small label that has E100P written on it, and the card is a bit different
than the T100P I already have, Does Digium use the same boards for both
cards ? I don't have an E1 link here, can I test the card just by loading
the driver and run zttool to see how many channels it shows ? I don't find a
wce1xxp driver only wct1xxp...
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users