[Asterisk-Users] Providing Telewest in the UK with per extension outbound callerID

[Storer, Darren]

Hi Steve,

Telewest should already allow the CLI transmission of your DDI range,
without further datafill changes. If it doesn't work you should check that
you are sending the appropriate number of digits.

Try sending:

 - 3 digit CLI
 - the whole number (minus the leading zero)

If the comments above don't help please post a trace of an outgoing call and
detail the number, if any, that is presented to the Called Party.

HTH

Darren
--
Comgate
Telco>Internet<Broadcast

  -----Original Message-----
  From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Steve Hanselman
  Sent: 01 July 2004 09:57
  To: 'asterisk-users at lists.digium.com'
  Subject: RE: [Asterisk-Users] Providing Telewest in the UK with per
extension outbound callerID


  Would be nice to do both (type 2 and 3 I believe in Oftel terms), but I'd
accept just our DDI if that was all I could get.



  Steve





  -----Original Message-----
  From: Storer, Darren [mailto:starusers at comgate.tv]
  Sent: 01 July 2004 09:35
  To: asterisk-users at lists.digium.com
  Subject: RE: [Asterisk-Users] Providing Telewest in the UK with per
extension outbound callerID



  Hi Steve,



  SH> Is anybody in the UK using Telewest as a PRI Telco provider?

  SH> Are you sending them caller ID?



  Just a quick point of clarification before commenting further, do you wish
to make calls via Telewest's network and send the CLI of your own DDI number
range or do you wish to send "other numbers" as your CLI? If you are seeking
to achieve the latter, what sort of numbers do you wish to propagate as the
CLI for your calls?



  Regards


  Darren

  --

  Comgate

  Telco>Internet<Broadcast

    -----Original Message-----
    From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Steve Hanselman
    Sent: 30 June 2004 18:57
    To: 'asterisk-users at lists.digium.com'
    Subject: [Asterisk-Users] Providing Telewest in the UK with per
extension outbound callerID

    Hi,



    Is anybody in the UK using Telewest as a PRI Telco provider?



    Are you sending them caller ID?



    I've been told by Telewest that:-



    1.      Oftel doesn't allow them to accept caller ID (this is rubbish,
and I replied pointing out where in the link to Oftel that they sent me it
was stated.  We need Type 2 caller ID)

    2.      Telewest can't do this. (this is rubbish, I'm certain that some
of our customers use Telewest and they provide them with caller ID)



    So, does anybody do this, and if so, what did you have to request from
them in order to enable it, and what do you provide to them (how many digits
and in what format).



    Regards



    Steve

  The information contained in this email is intended for the personal and
confidential use
  of the addressee only. It may also be privileged information. If you are
not the intended
  recipient then you are hereby notified that you have received this
document in error and
  that any review, distribution or copying of this document is strictly
prohibited. If you have
  received this communication in error, please notify Brendata immediately
on:

  +44 (0)1268 466100, or email 'technical at brendata.co.uk'

  Brendata (UK) Ltd
  Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK
  Registered Office as above. Registered in England No. 2764339

  See our current vacancies at www.brendata.co.uk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040701/198bad78/attachment.htm