[Asterisk-Users] Asterisk Indications

[Christopher Lee]

Hi Steve,

Interesting... I'm not sure! My copy of the original indications.conf had
400+17, and looking at the wiki it's the same there also
http://www.voip-info.org/tiki-index.php?page=Asterisk%20indications%20defaul
t

I tested 400*17 and it made a difference, but I still think 420+400 sounds
much closer to it... if there's any other Australian users who have
customised the tones and want to try it out let me know what you think or
what tones you're using.

I have just been thinking perhaps the main advantage of letting the SIP
device generate it's own indications is lower bandwidth use, for my setup
this isn't really an issue, and if I can figure out how to directly modify
the tones in the Cisco 7940 I'll have a go at it.

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Stephen Davies
> Sent: Sunday, 25 January 2004 3:34 PM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] Asterisk Indications
> 
> 
> 
> On Sun, 25 Jan 2004, Christopher Lee wrote:
> 
> > The original indications has 400+17/400, but I find that sounds more
> like
> > two beeps (which could possibly be confused with the Australian
> > congestion/busy tones).
> 
> Shouldn't it be 400*17?
> 
> Steve
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users