[Asterisk-Users] ETSI PRI ISDN Signalling

[Samuel Jimenez]

  Hi,

  Assuming that the problem *is not* soft settings I would recommend you to
verify that the channel mapping is the same in your adapter as in your
E100P.   Some times they do not match, and the D channel  does not arrive
where expected at each end.

  As you said, just a clue.

  Rgds

  Sam\\\




  ----- Original Message ----- 
  From: "Daniel Bichara" <daniel at bichara.com.br>
  To: <asterisk-users at lists.digium.com>
  Sent: Thursday, January 22, 2004 1:38 PM
  Subject: [Asterisk-Users] ETSI PRI ISDN Signalling


  > Hi All,
  >
  > I've bought a R2Adapter to convert R2Digital to ISDN. I am trying to
  > config E100P card but D-Channel is down. I know R2Adapter uses ETSI ISDN
  > Protocol so I tried unsucessfully setup switchtype to EuroISDN. Any
clue?
  >
  > Daniel
  >
  >
  > _______________________________________________
  > Asterisk-Users mailing list
  > Asterisk-Users at lists.digium.com
  > http://lists.digium.com/mailman/listinfo/asterisk-users
  > To UNSUBSCRIBE or update options visit:
  >    http://lists.digium.com/mailman/listinfo/asterisk-users