[Asterisk-Users] CAPI: Early-B3 working with AVM-B1?

[Karsten Wemheuer]

Hi Klaus-Peter,

Klaus-Peter Junghanns wrote:
> Hi Karsten,
> 
> are you sure your MSN is correct? If not T-Com will replace it
> with your "main" MSN and probably will ignore the CLIR setting.
> 
> best regards
> 
> kapejod

Thanks for the reply, but in this thread my problem is the "Early-B3",
not CLIR.

The MSN I used, is one of my own (not the first one), they are correct
and will be signaled to my mobile when testing, but I got no "ring"
signal. The mobile shows the correct number. If I press the red button
to discard the call, there are many messages in the debug (see my first
post in this thread). I thought it was a problem of the card, cause
Philipp told me, it works for him with  "Fritz!"-card. So I tested again
with aN ISA Fritz! card with the same result...

Hope You have any ideas...

Thanks
Karsten