[Asterisk-Users] T400P / T100P with Hong Kong IDA-P Lines

[David Liu]

Thanks Steve for the info.  that was certainly very helpful!  I shall see if
PCCW will b*tch about it.  Hopefully not!  By the way, have you tried DID on
IDA-P on any carriers in HK?  NTT, HGC, NWT?

David

----- Original Message ----- 
From: "Steve Underwood" <steveu at coppice.org>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, January 21, 2004 3:53 AM
Subject: Re: [Asterisk-Users] T400P / T100P with Hong Kong IDA-P Lines


> Hi David,
>
> David Liu wrote:
>
> > Hi there,
> >
> > Anyone had any success deploying Asterisk with a T100P or T400P card
> > in Hong Kong?  To my understanding, Hong Kong carriers only provide
> > IDA-P or IDA-M lines.  I am looking to use IDA-P.  Is this possible
> > with the card?
> >
> > I know Cisco 2651XMV with a VIC card can do it.  But that's just way
> > too expensive!
> >
> IDA-M is robbed bit signalling. It comes in several forms in HK which
> are functionally equivalent to the US, but use  different names. *
> should work OK with these. IDA-P is the 5ESS ISDN protocol. Again *
> should work OK. I haven' t tried * with real PCCW T1 lines, but its
> unlikely there will be any problems. The Digium cards are not approved
> in HK, and PCCW make ask what cards you intend to attach (sometimes they
> do, and sometimes they don't).
>
> Regards,
> Steve
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users