[Asterisk-Users] G.729 Licenses from Digium

[SamW]

I think what the license registration program does is read a unique
DISK-ID number to install the license. I think they cannot read that
number from anything else other than IDE HDD. 

- SamW


-----Original Message-----
From: David Gomillion [mailto:dgomillion at eyecarenow.com] 
Sent: Wednesday, January 21, 2004 12:52 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] G.729 Licenses from Digium

What about an IDE CDROM?  Does anyone know?  Or does the license have to
be
installed on an IDE device?  I'm a bit concerned, because I prefer not
to
use IDE for a production server, but g729 would be (in my opinion) a
good
thing.

----- Original Message ----- 
From: "SamW" <swc at svtinc.com>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, January 21, 2004 10:32 AM
Subject: RE: [Asterisk-Users] G.729 Licenses from Digium


> In my view at least one IDE drive must be installed in order for *
g729
> license to work.
>
> To simplyfy, here is the matrix (This is how I think it is please
> confirm)
>
> IDE Disk Install - g729 coder work.
> IDE/SCCI interfaces. Only a SCSI disk installed - g729 will not work.
> IDE/SCSI Interfaces. At lease one IDE disk installed - g729 will work.
>
> SATA Serial ATA Disk I have no clue how it works. Is SATA considered a
> IDE disk or a SCSI disk ?
>
> This is an issue that VoiceAge need to address soon.
>
> - SamW
>
> -----Original Message-----
> From: Amaury Jacquot [mailto:sxpert at esitcom.org]
> Sent: Wednesday, January 21, 2004 4:32 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] G.729 Licenses from Digium
>
> Terence Parker wrote:
> > OK - but what counts as a SCSI system?
> >
> > These days there are lots of pseudo-SCSI systems around - such as
our
> server
> > which runs a serial-ATA RAID but the driver is loaded as a SCSI
> device.
> >
> > Is that still IDE? Or SCSI?
>
> technically, it uses the SCSI command set over a serial link, so, it's
> SCSI
>
> > Terence
> >
> >
> >
> >>I know one thing for sure...
> >>G729 WILL NOT WORK after installation *(it never realy installs but
> does
> >>the segmentation faults), * will not start, and you will need to
> prevent
> >>g729 module from
> >>Starting in order for * to start.
> >>So do not buy if your box is SCSI in any part.
> >>Ta
> >>SJ
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users