[Asterisk-Users] Channel Banks

[Colin Anderson]

We use an Adtran Atlas 500 for this job (not for * but for our Mitel ICP
3300) you can aggregate FXO to T1 / PRI or any which way you want. It's a
killer box and very easy to work with. Adtran support is, in a word,
phenomenal. Very pricey, but ebay has some 800 models:
 
http://search.ebay.com/search/search.dll?query=adtran+atlas
<http://search.ebay.com/search/search.dll?query=adtran+atlas&ht=1&sosortprop
erty=1&from=R10&BasicSearch> &ht=1&sosortproperty=1&from=R10&BasicSearch=
 
 

-----Original Message-----
From: Kostur, Andre [mailto:Andre at incognito.com]
Sent: Monday, January 19, 2004 9:30 AM
To: 'asterisk-users at lists.digium.com'
Subject: [Asterisk-Users] Channel Banks



OK, I'm having some trouble finding which equipment I need.... 

What I'd like to do is take about a dozen incoming analog lines and bring
them into an * server.  Of course one is going to have a hard time fitting a
dozen X100P cards in a case, so an alternative would be a channel bank and a
T100P in the * server.  Now here's where my confusion comes in.  I _think_ I
need a channel bank that has a T1 interface on one side (to go to the *
server), and FXO interfaces on the other (to accept the incoming analog
lines from the telco)?  And are there suggestions out there as to which
channel banks one should select for this sort of deployment?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040119/a096dda7/attachment.htm