[Asterisk-Users] RE: current version

[Ray Burkholder]

Will either of the h323 channels work with gatekeepers properly?  Ie, 
reregister through * reloads and such?  I've had problems with chan_h323 in 
this regard.  Chan_h323 will register fine with a gnugk first time around.  But 
after a reload, it loses its connection.  Or should I try downloading the 
latest version yet again to see if it is fixed?

Quoting Brian West <brian at bkw.org>:

> You can't use chan_h323 with call manager.
> 
> bkw
> 
> On Sun, 18 Jan 2004, Dan Austin wrote:
> 
> > I tried to use it to create a 'trunk' to Cisco's call manager.  The
> > 0.7.1 code worked up to a point.
> >
> > The call would be established, but audio was one-way from the Call
> > Manager.  Asterisk with
> >
> > Chan_h323 would not setup the sending rtp stream.  The debug results
> > showed the sending
> >
> > stream as using ip:0.0.0.0
> >
> >
> >
> > I have not checked for a CVS update to see if it is fixed, or if that
> > might just be a quirk when
> >
> > connected to Call Manager.  Chan_oh323 works fine with Call Manager.
> >
> >
> >
> > Dan
> >
> >
> >
> >   _____
> >
> > From: T. Chan [mailto:tommy.chan at utimail.com]
> > Sent: Sunday, January 18, 2004 5:55 PM
> > To: asterisk-users at lists.digium.com
> > Cc: Alan Chan
> > Subject: [Asterisk-Users] RE: current version
> >
> >
> >
> > Dear All,
> >
> >
> >
> > I have been using Asterisk "10 days ago" version loaded onto my Redhat
> > 7.3 with kernel 2.4.18-3 running Jeremy's h323 driver. It has been
> > running okay with a bit of problems, like system crashing after certain
> > period of time with 15 simultaneous calls or so.
> >
> >
> >
> > I have tried to load up the current version today again (0.7.1 I guess)
> > and apparently with the new H323 driver as well. I have recompiled the
> > H323 libraries with version Pwlib1.5.2 and Openh3231.12.2 as
> > recommended. However, no call was able to get through at all. I have
> > tried this before when 0.7.0 came out when had the same result, I
> > thought there were bugs, but now I am getting the same thing. I have
> > tried using the same h323.conf configuration as well as trying to change
> > a couple of faststart.....parameters, but same result.
> >
> >
> >
> > Is there anyone who has had good experience with the new version of
> > Asterisk 0.7.1 with the most current Jeremy H323 driver?
> >
> >
> >
> > Please suggest, thanks
> >
> >
> >
> > Tom
> >
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> -- 
> Scanned for viruses and dangerous content at 
> http://www.oneunified.net and is believed to be clean.
> 
> 


Ray Burkholder
704 644 6999 x2002
http://www.oneunified.net
ray at oneunified.net


-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/

-- 
Scanned for viruses and dangerous content at 
http://www.oneunified.net and is believed to be clean.