[Asterisk-Users] Asterisk Integration with Lucent Definity g3si

[Ken Godee]

Matthew Branton wrote:
> Come monday I will see if I can get the PRI line working if we have an 
> extra 767 circuit pack. I promise that if/when we get this working I 
> will definitely write up a detailed explanation of the steps involved. 
> Right now we have a partial setup but a fully integrated box seems 
> within reach... any more specifics would be great.
> 
> 
> Matt
> 

Matt,

Been doing a little digging, so far found some good info on
Cisco's web site, here's an example......

http://www.cisco.com/application/pdf/en/us/guest/products/ps259/c1237/ccmigration_09186a00801475be.pdf

(The above url probally got split)

Also go to Cisco's web site and do a search on
"G3 migration" Lots of info on migrationg legacy G3 to voip
and also some good war storys.

There's also a very good definity forum that's very active
with many Definity consultants willing to give a hand on all
aspects of G3 system admin.

http://www.tek-tips.com/gthreadminder.cfm/lev2/9/lev3/89/pid/690

Sounds like you're a step ahead of me on this, but the above forum
is a good stop as soon as I dig through the manuals a little and
brush up on my G3 talk.

Let us all know how it goes, I'm sure it will work fine and just
as soon as I can get to it, I will get it going.

Ken