[Asterisk-Users] Ringback Problem

[Jess Magnaye]

I would just like to follow-up on the ringback problem I'm getting from *.  As I've said in my previous post, I am not hearing the "real ringback" from the Cisco gateway terminating my call.  I don't want to provide false ringback from * (r option of dial), because it'll still give me ringback even if I am suppose to hear announcement or fastbusy.  Below is captured ISDN debug from Cisco.  It's sending ALERT (progress indicator 8), but I am not sure why * is not relaying that signal to the ATA.  

I hope someone is out there to help me on this.  Thanks in advance.


Jan 15 22:53:24: ISDN Se1/0:23: TX ->  SETUP pd = 8  callref = 0x0078
Jan 15 22:53:24:         Sending Complete
Jan 15 22:53:24:         Bearer Capability i = 0x8090A2
Jan 15 22:53:24:         Channel ID i = 0xA98397
Jan 15 22:53:24:         Calling Party Number i = 0x0081, '6882332', Plan:Unknown, Type:Unknown
Jan 15 22:53:24:         Called Party Number i = 0x80, '12123637055', Plan:Unknown, Type:Unknown
Jan 15 22:53:24: ISDN Se1/0:23: RX <-  STATUS pd = 8  callref = 0x8078
Jan 15 22:53:24:         Cause i = 0x80E3A1 - Information element not implemented
Jan 15 22:53:24:         Call State i = 0x01
Jan 15 22:53:24: ISDN Se1/0:23: RX <-  CALL_PROC pd = 8  callref = 0x8078
Jan 15 22:53:24:         Channel ID i = 0xA98397
Jan 15 22:53:27: ISDN Se1/0:23: RX <-  ALERTING pd = 8  callref = 0x8078
Jan 15 22:53:27:         Progress Ind i = 0x8088 - In-band info or appropriate now available 
Jan 15 22:53:32: ISDN Se1/0:23: TX ->  DISCONNECT pd = 8  callref = 0x0078
Jan 15 22:53:32:         Cause i = 0x8090 - Normal call clearing
Jan 15 22:53:32: ISDN Se1/0:23: RX <-  RELEASE pd = 8  callref = 0x8078




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040115/38e03031/attachment.htm