[Asterisk-Users] Asterisk on FreeBSD 4.9?

nanog at cfsdigital.com nanog at cfsdigital.com
Wed Jan 14 07:47:55 MST 2004


I'll put up some more $$ along with the others to continue the work on the
FreeBSD part. I'll be able to test this out with my network and well donate
freebsd server on my network for Asterisk Developers to continue the work on
this. Just email me off list for details

-Frankie Gravato - fgravato at slingo.com
Senior Systems and Network Guru
Slingo Inc - www.slingo.com
" First in Fun "


----- Original Message ----- 
From: "John Todd" <jtodd at loligo.com>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, January 14, 2004 9:22 AM
Subject: RE: [Asterisk-Users] Asterisk on FreeBSD 4.9?


> >I'm about to post on bugs to offer a bounty for work on FreeBSD.  I'm
> >fairly certain that others will come along to increase that bounty.
> >
> >Before I do post it, I would like some input on what the requirements
> >should be.  Here's what I have so far:
> >
> >  - Must be completed before 6/30/04
> >  - Support for all Zaptel hardware
> >  - Commitment of the drivers to both
> >    4-STABLE and 5-CURRENT/STABLE
> >
> >I'm not completely conversant on how GPL software can be committed to
> >the kernel, but I believe it can be done under the contrib/ directory.
> >
> >I do not want this work to exist as a series of
> >downloads/checkouts/patches/modules if it can be avoided.  I don't want
> >to patch my kernel or load modules.  I want to be able to do a cvsup on
> >/usr/src, add necessary device entries to my kernel config file and
> >build it.
> >
> >I'd like to see astersk and libpri installs follow the reccomendations
> >and requirements found in the FreeBSD hier(1) man page.  Specifically,
> >it should install completely to /usr/local/.  Preferrably, I'd like to
> >see a port created for both asterisk and libpri, even just a metaport
> >that uses CVS to fetch the source and any OS-specific patches.
> >
> >Any comments before I post the bounty?  I will recommend that those with
> >suggestions on the requirements and those that offer additional bounties
> >for this will sit in committee to determine when the requirements of the
> >bounty have been met.
> >
> >--
> >   Troy Settle
> >   Pulaski Networks
> >   http://www.psknet.com
> >   866.477.5638
> >
> [snip]
>
> Troy -
>    While it is not 100% relevant to your requests, I'd like to see
> continued support of NetBSD/OpenBSD in this same vein and added to
> the bounty, since the additional work to get things correctly
> functioning on those two systems seems to be fairly minor while the
> "hood is open".  MacOS is a different animal, and (IMHO) lower on the
> "must-have" list when it comes to Zap device support, though it would
> still be cool.
>
>    If OpenBSD (1st choice) and NetBSD (2nd choice) can be added for
> Zap device support, count me in on the bounty.  Talk to me privately
> if you want to get a dollar figure.  I've had * running on OpenBSD,
> but of course no Zap hardware.  I'd move everything over to OpenBSD
> if it supported Zap, since that's my primary OS for all the platforms
> in my network.  While Linux in it's various flavors is great, it's
> simply not what my network runs, and so my * boxes are the "odd man
> out" systems, which makes me somewhat uncomfortable from a security
> and management perspective.
>
>    Additionally, if files are to be installed in /usr/local, then I'd
> like to see the configs remain in /etc/asterisk since on my systems
> (and many other people's) the /usr/ directories are for binaries
> only; no configurations or "moving parts" so those directories can be
> mounted read-only or mounted from a common server if necessary.  I'm
> sure this is what you meant, but I've seen config directories
> unwisely located in /usr/local before, and I wanted to make sure
> everyone is of the same mind where that is concerned.
>
> JT
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>




More information about the asterisk-users mailing list