[Asterisk-Users] 3.3v PCI board - TE410P photo

[Scott Stingel]

Yes, the card works nicely in the 64-bit slots, it just doesn't use all of
the pins. Example, the Tyan S2723 works fine.

The 3.3v key helps to hold it snugly.

Cheers
Scott

Scott M. Stingel 
Emerging Voice Technology Inc.

Email:          scott at evtmedia.com <mailto:scott at evtmedia.com>   
URL:            www.evtmedia.com <http://www.evtmedia.com>   



-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of WipeOut
Sent: Tuesday, January 13, 2004 8:15 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] 3.3v PCI board - TE410P photo


Scott Stingel wrote:

>Hi-
>
>I have posted a photo of the TE410P Digium card on my site,
>so that those wishing to purchase a compatible motherboard
>can see physically what the PCI slot requirement is:
>
>http://www.evtmedia.com/TE410P.htm
>
>I believe the required slot is a 64-bit, 3.3 Volt PCI, most
>commonly found on Xeon-based motherboards.  A 64-bit slot is
>longer than the TE410P board requires, but the PCI connector
>layout matches.
>
>CHECK YOUR BOARD CAREFULLY, not only the spec's, but a picture
>of the PCI slots.  I've seen some of the boards posted here do
>not in actuality have compatible slots.
>
>  
>

Looking at your photo the card is a 3.3v 32 bit card.. Unfortunately it 
does not liik like anyone has a board with a 3.3v 32bir, they all go 
straight to the 64bit slots which i guess is understandable..

Here is a page with some photos.. 
http://hsi.web.cern.ch/HSI/s-link/devices/s32pci64/slottypes.html

Later..

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users