[Asterisk-Users] Record all phone calls

[Jimmy Riley]

Here is what I have now. Where should the line " exten =>
_.,1,macro(record-on,${EXTEN},${CALLERIDNUM})" go should it be under [sip]?
Right now if I call sip to sip monitoring starts and the calls connect but I
only get 44 byte files. If I call and iaxtel number monitoring starts but
call never gets placed and again 44byte files with nothing in them.
Thanks for the help.

[iaxtel]

exten =>
_1700XXXXXXX,1,Dial(IAX2/jmproductions:xxxxx at iaxtel.com/${EXTEN}@iaxtel)
exten =>
_1888NXXXXXX,1,Dial(IAX2/jmproductions:xxxxx at iaxtel.com/${EXTEN}@iaxtel)
exten =>
_1877NXXXXXX,1,Dial(IAX2/jmproductions:xxxxx at iaxtel.com/${EXTEN}@iaxtel)
exten =>
_1866NXXXXXX,1,Dial(IAX2/jmproductions:xxxxx at iaxtel.com/${EXTEN}@iaxtel)
exten =>
_1800NXXXXXX,1,Dial(IAX2/jmproductions:xxxxx at iaxtel.com/${EXTEN}@iaxtel)


[sip]
include => iaxtel
exten => _.,1,macro(record-on,${EXTEN},${CALLERIDNUM})
exten => s,1,Dial(SIP/one|20|tr)
exten => 1001,1,Dial(SIP/one|20|tr)
exten => 1001,2,VoiceMail,u1001
exten => 1001,102,VocieMail,b1001
exten => 2001,1,Dial,IAX2/guest at 24.202.159.205/2001
exten => 1002,1,Dial(SIP/two|20|mtr)
exten => 1002,2,VoiceMail,u1002
exten => 1002,102,VoiceMail,b1002
exten => 6001,1,Ringing
exten => 6001,2,Wait(2)
exten => 6001,3,VoicemailMain


________________________________________
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Robert Mann
Sent: January 10, 2004 12:48 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Record all phone calls

<See Below>
 
----- Original Message ----- 
From: Jimmy Riley 
To: 'asterisk-users at lists.digium.com' 
Sent: Saturday, January 10, 2004 10:01 AM
Subject: [Asterisk-Users] Record all phone calls

I want to record all phone calls made inbound and outbound. I'm new so
having a hard time getting this started. Here is what I have so far but
isn't working. Can someone help me out? Thanks,

[macro-record-on]
exten => s,1,SetVar(CALLFILENAME=${DATETIME}-${ARG2}-${ARG1})
exten => s,2,Monitor(wav,${CALLFILENAME})

[sip]
include => macro-record-on
include => iaxtel 
exten => _,1,macro(record-on,${EXTEN},${CALLERIDNUM})
exten => 1001,1,Dial(SIP/one|20|tr)
exten => 1001,2,VoiceMail,u1001
exten => 1001,102,VocieMail,b1001
exten => 2001,1,Dial,IAX2/guest at 24.202.159.205/2001
exten => 1002,1,Dial(SIP/two|20|mtr)
exten => 1002,2,VoiceMail,u1002
exten => 1002,102,VoiceMail,b1002
exten => 6001,1,Ringing
exten => 6001,2,Wait(2)
exten => 6001,3,VoicemailMain
 
There are a few issues I can see with this but your two big problems are as
follows.
 
You never want to include a macro.
include => macro-record-on
So remove that line altogether.
 
You show exten => _,1,macro(record-on,${EXTEN},${CALLERIDNUM})
the _ tells asterisk that you are going to want to match characters but then
you dont tell it what you want to match.
so exten => _.,1etc...  See the . after _ this tells * to match the rest of
the characters (digits)
 
Those are your two big issues with not getting the recording to start.