[Asterisk-Users] Two E100P boards - could not load zaptel module - Channel 63 - no such device

[Scott Stingel]

Yes, I think it should be:

span=1,0,0,ccs,hdb3
bchan=1-15
dchan=16
span=2,0,0,ccs,hdb3
bchan=32-46,48-62
dchan=47

Cheers,

Scott M. Stingel 
Emerging Voice Technology Inc.

Email:          scott at evtmedia.com   
URL:            www.evtmedia.com   



-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Daniel Bichara
Sent: Sunday, January 04, 2004 5:11 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Two E100P boards - could not load zaptel module -
Channel 63 - no such device


Hi,

I have two E100P boards connected to my PC. I wish to setup two 
E1-ISDN-PRI lines, the first SPAN with 15 channels and the second one 
with 30 channels. When I try to load zaptel modules, I get an error message:

"Loading zaptel framework:
Loading zaptel hardware modules: wct1xxp wcusb
Running ztcfg: ZT_CHANCONFIG failed on channel 63: No such device"

Follows my zaptel.conf:

span=1,0,0,ccs,hdb3
bchan=1-15
dchan=16
span=2,0,0,ccs,hdb3
bchan=33-47,49-63
dchan=48,64

Any clue?

Daniel




_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users