[Asterisk-Users] DTA-310 Outbound Dialing

[Jeremy Jones]

When I speak of the dial plan here, I'm referring to a portion on the
DTA-310 web pages, not my * dial plan.  I've seen a couple posts about
setups like this:

* w/tdm card <--> dta-310 <--> packet8 network <--> pstn

I'm not using the packet8 service, just the gear.  Like this:

dta-310 <--> * <--> as5300 <--> pstn

Dialing in works (i.e. pstn to dta-310), but I can't figure out the
dta-310 to pstn thing.

Jeremy Jones

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Hermann
Wecke
Sent: Thursday, February 26, 2004 1:30 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] DTA-310 Outbound Dialing

On Thu, 26 Feb 2004, Jeremy Jones wrote:
> I _think_ my problem has to do with the "Dial Plan" settings on the
SIP
> configuration page.  Anyone familiar with these things?  By default,
the
> dial plan setting reads: "1xxxxxxxxxx|x.T".

This is my dialplan for Packet8 / 8x8:

exten => _91[2-7]XXNXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91[2-7]XXNXXXXXX,2,Congestion

Dial 9 to get "a line", only will accept calls non-toll free numbers
(toll
free calls are route elsewhere), dial the "trunk card" and the number,
strip the initial "9".

This recipe is locate under extensions.conf